----------------------------
Release notes for ReWaRD 2.8
----------------------------
©1992-2020 Geocentrix Ltd. All rights reserved.
"Geocentrix" and "ReWaRD" are registered trademarks of Geocentrix Ltd.
Release date: 25/09/2020
Contents:
ReWaRD 2.8 Release 3
ReWaRD 2.8 Release 2
ReWaRD 2.8 Release 1
Program files in the latest build
ReWaRD 2.8 Release 3
--------------------
Version 2.8.3.20091
Build date 25/09/2020
Issues fixed (23 items):
3447 Program crashes on importing licence
3446 Draw a horizontal line to indicate level and type of water table
3445 Cannot select ground profile or excavation on drawing
3444 Line is drawn above top of wall to top of stepped ground on displaying results
3441 Program crashes on importing LIC file via Licence Registration Wizard
3426 Results vary slightly between BS 8002:2015 and EN 1997-1:2004
3424 Enable renewal of licence from the Internet
3401 Examples from Clayton and Militisky book no longer work
3400 Not clear that custom earth pressure coefficients are inclined values
3396 Grey box appears to left corner while the program is opening
3389 Open construction stages automatically on program startup
1531 'Wall isn't long enough' when retaining large stepped ground profile
1312 Tension crack fluid pressure calculated incorrectly in presence of standing water
1214 Pressing OK button in a dialog box does not trigger OK command (click OK button with mouse does)
1057 Burland-Potts method gives anomolous safe embedment length for wall in stiff clay (short-term)
971 Program crashes calculating structural forces with wide berm
639 Wall too stable with imposed load acting on it
628 Unexpected result using berm
624 Wall is stable at both ends of the search range for FOS=1.0 for a multi-propped wall with minimal embedment
608 Earth pressure coeffs not available for secondary parameter = -0.894723
603 Factor of safety fp in PH is different on the program than on the manual
532 Cannot calculate minimum safe embedment or bending moments for wall with berm
505 Cannot calculate full influence of berm: wall too short
ReWaRD 2.8 Release 2
--------------------
Version 2.8.2.20061
Build date 09/07/2020
Issues fixed (19 items):
3394 This product requires at least a non-virtualized hardware system. Setup cannot continue
3391 Message Board no longer gives detailed information about progress of calculations
3390 Provide facility to read MAC address of host computer
3388 Anchor is drawn with a shorter than realistic free length
3387 No explanation why calculation with anchor in berm does not proceed
3384 Stepped ground profile is drawn with a vertical face
3383 Program crashes on attempting to create a new anchor
3356 Program crashes on printing to "Microsoft Print to PDF" driver
3350 Error "Unable to locate any Feature matching scope" when attempting to export C2V file
3349 x,y coordinates are not shown on the Status Bar
3348 Program crashes on selecting command File > Print > Print Preview
3347 The character '&' in a Company Name appears as '&' in the Licence Registration box
3345 Warning message displays wrong value for maximum angle of shearing resistance
3335 User Manual is out of date
3332 Program is not disabled when outside ReAssurance period
3187 Display horizontal components of prop and anchor forces as well as axial values
2841 Error message "missing/misplaced objects in the construction prototype’’ should give more useful information
2500 Change label in Licence Registration Wizard to 'Company Name'
538 Earth pressure coefficients not available for soil friction=8.35... (see kerisel.rdb)
ReWaRD 2.8 Release 1
--------------------
Version 2.8.1.20021
Released 11/02/2020
Issues fixed (2 items):
3327 Nothing happens when CIRIA C550 or C760 standards are selected
3326 Boreholes do not appear on Drawing Board
ReWaRD 2.8 beta 2
-----------------
Version 2.8.0.19092
Released 01/10/2019
Issues fixed (1 item):
3272 Allow ReWaRD 2.8 to be authorized with a ReWaRD 3.x licence
ReWaRD 2.8 beta 1
-----------------
Version 2.8.0.19080
Released 23/08/2019
Issues fixed (10 items):
3253 Values for 'Allowable range' not given in error message generated by Construction Wizard
3178 Allow the program's licence to be imported directly from LIC file
3177 Allow angles to be entered in radians or degrees
3176 Provide separate controls for Depth and Level wherever relevent
3122 Display both density and weight controls on Weight/Density page of Soil property box
3094 Discrepancies in Ka and Kp values vs those given in Eurocode 7 Annex C
3014 Provide separate depth and level controls
3010 Program does not detect soft clay profile when calculating displacements
2836 IP address not entered into error message "The security key at does not contain a licence for ReWaRD"
2615 Add menu item to allow user to install device drivers
Program files in the latest build
---------------------------------
> indicates file has changed from the previous release
folder
> ReWaRD2.exe (2.8.3)
> AnchorsOWL.dll (2.20.3)
BoreholesOWL.dll (2.20.2)
> CoefficientsOWL.dll (2.20.3)
> ExcavationsOWL.dll (2.20.3)
> GeocentrixOWL.dll (2.20.3)
> GroundsOWL.dll (2.20.3)
InterfacesOWL.dll (2.20.2)
> LayersOWL.dll (2.20.3)
> LoadsOWL.dll (2.20.3)
MaterialsOWL.dll (2.20.2)
ProjectOWL.dll (2.20.2)
> PropsOWL.dll (2.20.3)
> RexUIOWL.dll (2.20.3)
SoilsOWL.dll (2.20.2)
> StandardsOWL.dll (2.20.3)
SupportsOWL.dll (2.20.2)
> SurchargesOWL.dll (2.20.3)
WallsOWL.dll (2.20.2)
> WaterTablesOWL.dll (2.20.3)
boost_date_time-bcb-mt-1_39.dll
boost_filesystem-bcb-mt-1_39.dll
boost_serialization-bcb-mt-1_39.dll
boost_system-bcb-mt-1_39.dll
cc32250mt.dll (1.144.0.0)
> hasp_windows_48297.dll (8.11.42174.60000)
> libcrypto-1_1.dll (1.1.1.7)
> libcurl.dll (7.71.1.0)
> libssl-1_1.dll (1.1.1.7)
owl-6.44-b730-x86-t.dll (6.44.1.0)
vtssdl32.dll (2.0.5.5)
> zlib1.dll (2.2.11.0)
hhctrl.ocx (5.2.3790.4110)
Clough.dat (27/06/2013)
Databases\ (all 14/09/2019, except where noted)
Chalk.rdb
Chsvfil.rdb
Chsvsilt.rdb
Clay.rdb
Custsoil.rdb
Granfill.rdb
Gransilt.rdb
Gravel.rdb
Organic.rdb
Rivrsoil.rdb
Rock.rdb
Sand.rdb
Sections.rdb (21/07/2014)
Help\
ReWaRD2.chm (13/07/2011)
Layouts\
All.rwt (31/01/2000)
Coeffs.rwt (31/01/2000)
Default.rwt (31/01/2000)
Design.rwt (31/01/2000)
Soil.rwt (31/01/2000)
Srcharge.rwt (31/01/2000)
Manuals\
ReWaRD 2 Quick-Start Guide.pdf (07/02/2020)
ReWaRD 2 Reference Manual.pdf (07/08/2015)
ReWaRD 2 User Manual.pdf (03/04/2020)
Release Notes\
> readme.rtf (25/09/2020)
> ReWaRD2.8.3.txt (25/09/2020)
C:\ProgramData\Geocentrix\ReWaRD\2.8\
-------------------------------------
MRU.ini (29/10/2010)
ReWaRD2.lic (01/02/2018)
ReWaRD2.log (01/02/2018)
C:\Users\Public\Documents\Geocentrix\ReWaRD\2.8\
------------------------------------------------
Examples\ (all 09/07/2020 except where noted)
Bowles.rwd
> Clayton.rwd (20/09/2020)
Handbook.rwd
Templates\ (all 07/08/2014)
bottom up.bmp
bottom up.RWT
CIRIA 104.bmp
CIRIA 104.RWT
default soils.bmp
default soils.RWT
Kuala Lumpur.bmp
Kuala Lumpur.RWT
London.bmp
London.RWT
Piling Handbook.bmp
Piling Handbook.RWT
Singapore.bmp
Singapore.RWT
top down.bmp
top down.RWT
tutorial.bmp
tutorial.RWT
Tutorials\
Tutorial 1\ (all 09/07/2020 except where noted)
Step 1.rwd
Step 2.rwd
Step 3.rwd
Step 4.rwd
Step 5.rwd
Tutorial 1.rwd
Tutorial 2\ (all 09/07/2020 except where noted)
Step 1.rwd
Step 2.rwd
Step 3.rwd
Step 4.rwd
Step 5.rwd
Step 6.rwd
Step 7.rwd
Step 8.rwd
Step 9.rwd
Tutorial 2.rwd
Tutorial 3\ (all 09/07/2020 except where noted)
Step 1.rwd
Step 2.rwd
Step 3.rwd
Step 4.rwd
Step 5.rwd
Step 6.rwd
Step 7.rwd
Step 8.rwd
Step 9.rwd
Tutorial 3.rwd
***Sentinel HASP/LDK Windows Run-time Installers***
Setup\
Sentinel HASP-LDK\
inventory.txt
Firmware Update\
FirmwareUpdate.exe (7.5.1.62469)
readme.html
HASP\
License Manager Setup (Win32)\
135-Install_LM_Under_Windows_7.pdf
lmsetup.exe (8.32.5.40)
readme.html
Removal Tool\
aksinstdel_windows.exe (1.0.22017.1)
readme.html
Windows Run-time Enviroment\
> Release Notes.pdf
Command-line Installer\
command line switches.txt
> haspdinst.exe (8.13.39675.1)
> readme.html
GUI Installer\
> HASPUserSetup.exe (8.13.45217.60000)
> readme.html
-------------------------------
End of release notes
-------------------------------