---------------------------- Release notes for Repute 2.5 ---------------------------- ©2002-19 Geocentrix Ltd. All rights reserved. "Geocentrix" and "Repute" are registered trademarks of Geocentrix Ltd. Last updated: 19/12/2019 Contents: Repute 2.5 Release 6 Repute 2.5 Release 5 Repute 2.5 Release 4 Repute 2.5 Release 3 Repute 2.5 Release 2 Repute 2.5 Release 1 Repute 2.5 Release Candidate 3 Repute 2.5 Release Candidate 2 Repute 2.5 Release Candidate 1 Repute 2.5 Beta 3 Repute 2.5 Beta 2 Repute 2.5 Beta 1 Program files in the latest build Repute 2.5 release 6 -------------------- Version 2.5.6.19092 Released 20/12/2019 Issues fixed (35 items): 3301 Unexpected error message "Some items extend beyond the drawing..." 3298 Improve clarity of error message "Too many concurrent users" 3297 Ultimate axial capacity of pile exceeded by tension pile in rock 3296 Different results obtained from v2.5 Release 5 compared with Releases 2 and 4 3295 Cannot find HASPUserSetup.exe 3293 Convert stiffness from old RPX files to new format 3291 Amplification factor for combination of action is not set on opening project file 3290 Simplify entry of small strain and large strain stiffnesses 3287 Input error: bearing capacity factors Nq flag is not 1 or 2 3286 Intel(r) Visual Fortran run-time error 3284 Add support for pipe pile with concrete infill 3283 Add compiler name and version to About box's technical information 3282 Relocate temporary PGroupN files in Windows TEMP folder 3281 Atmospheric pressure for rock algorithms set incorrectly on opening RPX file 3280 Ultimate capacity of pile group exceeded when pile is founded in rock but not in weak deposits 3279 In boundary element analyses, rock is treated as soil, unless it is placed in a Rock Layer 3278 Same results are obtained after changing loads without saving and re-opening RPX file 3275 Sorting items does not mark project as needing to be saved 3274 Intel Visual Fortran run-time error when running BEA with infinite bearing pressure limit 3271 Cannot find Sentinel LDK/HASP Runtime setup program 'C:/Program Files (x86)/Geocentrix/HASPUserSetup.exe' 3269 Workbook does not allow Notes to be displayed on its Combination of Action page 3268 Add ability to update pile properties via Pile Group Import Wizard 3266 Allow forces and moments to be specified in single row in load import spreadsheet 3265 Import Loads Wizard should ignore forces and moments that have zero magnitude 3264 Add ability to show grid lines on plan 3262 Curl error 7: Failed to connect to host or proxy 3259 Display the total number of piles in the pile group in its Property Inspector 3252 Program automatically generates many algorithms for each boundary element analysis 3251 Abnormal program termination when importing pile group specifying 'Augered' pile type 3250 BEM analysis uses large-strain Es after switching stress-strain model from bi-linear to hyperbolic 3249 Error reading non-linear layer when running boundary element analysis with earth pressure algorithm 3248 Error reading non-linear layer 3246 Build number always written as '1' in RPX file's tag 3229 Changes to the parameters of FlemingAnalysis do not clear old results 2800 Ruler shows ground level at -8.5m for pile group with raked piles with upstand Repute 2.5 release 5 -------------------- Version 2.5.5.19080 Released 07/08/2019 Issues fixed (44 items): 3244 Algorithms do not need to be created when opening legacy linear-elastic Boundary Element Analysis 3243 Base diameter of bored pile is set to default value (600 mm) when imported via Wizard if shaft diameter is smaller 3241 Borehole is drawn above ground level when an upstand pile and standing water are present 3239 Provide function to remove duplicate items from a project file 3236 Allow depth of each action to be specified in the Action Wizard 3234 Move obscure/legacy Boundary Element Analysis options to 'Advanced Options' group 3233 'Not specified' error in Drawing Board when Pipe Pile or Spun Pile has no section specified 3231 Micropiles specified with diameter 300 mm are lost on re-opening RPX file 3230 Provide algorithms for shaft friction and end bearing in rock 3228 Borehole does not refresh automatically when selecting a new layer in the Layer Selection box 3227 By default, hide the effective cohesion column from Workbook display for Longitudinal ULS calculation 3225 Duplicate command appends '- Copy' to previously duplicated items instead of '- Copy (n)' 3224 Internal error: no XML reader has been registed for 'RockFrictionAlgorithm' 3221 Error in calculation of elastic section modulus for minor axis 3220 Minor improvements to Bearing Pile Property Inspector 3219 Automatically write error messages to the program's log 3216 Allow interface adhesion value in Boundary Element Analysis to be specified via algorithm 3215 Revise the alpha algorithm to include the Kolk and van der Velde (1996) method 3214 Cannot increase diameter of Custom Pipe Section from default value 3209 Input error: invalid delta specified for drained soil layer 3208 Revise maximum skin friction limit to match CIRIA C574 value for chalk 3205 Workbook display of borehole properties has gone awry 3203 Cannot enter custom value directly into Bearing Capacity Factor algorithm Property Inspector 3197 Pile Group Wizard is disabled in Trial Edition (but is needed for Tutorial 4) 3193 Include the program's build number in the RPX file 3188 Display licence number from RPX file when opening that file 3186 Vertical displacement is reported incorrectly in Reporter 3182 Change items available in Trial Edition via Stockyard 3181 Unable to run Repute Trial Edition 3180 Network settings are not preserved when importing new licence (.LIC) file 3175 Cannot specify custom spun pile section with diameter > 600 mm 3174 Load on single pile ignores combination of actions (just considers self-weight) 3173 Boundary element analysis includes applied forces twice when a design standard is linked to it 3172 Add warning message to inform the user if they are not running the latest release 3171 Add current release to message stating "The latest release of this program is ..." 3170 Piglet XLS conversion wizard cannot read spreadsheet with additional page inserted at beginning 3169 Error message "Can only convert Piglet v5.1 files. File versions in -NAN" 3104 Prevent user from entering Fx = Fy = Fz = 0 into Action Wizard 3081 Allow skin friction and end-bearing values in Boundary Element Analysis to be specified via algorithms 3032 Cannot switch Berezantsev bearing capacity algorithm to Custom option just by typing custom value 2983 Provide "Yes to All/No to All" options when deleting multiple items in the Project Manager 2924 Provide algorithms to support Poulos's equations for calcuating pile capacity in rock 2905 Cannot perform ULS verification on pile group containing one pile 2499 Provide section properties for European wide flange beams Repute 2.5 release 4 -------------------- Version 2.5.4.18100 Released 21/11/2018 Issues fixed (48 items): 3167 Spurious values given for minimum and maximum pile rotation in Reporter 3166 Wrong font displayed in the Reference Manual 3163 Program does not show welcome screen on startup 3162 Reporter does not display value of dG/dz for soils 3161 Extend action import capability to include variability 3160 Allow server IP address to be specified using hostname 3159 Make Tutorials available for download from the Geocentrix website 3158 Spreadsheet exported from boundary elements worksheet has very large footer rows 3151 Allow bored pile diameters greater than 3000 mm to be entered 3150 Changing the stiffness of a duplicated soil also change the stiffness of the soil it duplicates 3147 Add support for the latest range of ICP spun piles 3146 Borehole is not drawn at correct elevation 3145 A 'ghost' (white) tubular pile appears at the plan centre of the pile group 3143 Improve feedback when boost::filesystem::create_directory error occurs 3142 Provide better error handling when saved boundary element results are corrupted 3141 Piles lengths do not change in Workbook according to instructions given in User Manual pp35-36 3136 Graph does not display results after building the current scenario 3135 Allow multiple items to be deleted by answering 'Yes to All' in dialog box 3134 Access violation on deleting two or more scenarios or calculations from the Project Manager 3130 An error occurred while reading data for 'StockPipeSection': Outside diameter must be >= 333.333 mm and <= 3657.6 mm. Value entered = 219.1 mm 3129 Add support for saving Workbook results in Excel's XLSX format 3128 Display Release number in splash screen 3127 Error 1606. Could not access network location ?y?yS_VERSION_INFO\Repute Projects 3126 Error on opening Repute 1.x file: "Number of pile elements must be >= 3 and <= 3. Value entered = 10" 3125 Unable to change the pile cap thickness 3123 Design base resistance (Rbd) does not account for the calculation's bearing pressure limit 3118 Top of borehole is drawn at 6 m above ground level 3117 Change the name of the boundary element analysis "linear-elastic/perfectly-plastic" model to "bi-linear" 3116 Change the default stress-strain model for the boundary element analysis to bi-linear 3115 Access violation when opening RPX file by double-clicking on it in Windows' File Manager 3114 Access violation when validating boundary element analysis in which pile/soil stiffness ratio is less than 5 3112 Access violation when running a boundary element analysis that generates an error during validation 3109 Splash screen does not appear on program startup 3108 Access Violation on validating undrained calculation using Chalk 3107 Invalid default value in Pile Group Wizard 3106 Text is out of date in Quick Start Guide, Tutorial 6 Step 2, bullet 10 3105 Clarify in the Quick-start Guide the need to click on Pile Group 1 in order to view its properties in the Property Inspector 3102 Rulers are not drawn properly on program startup 3100 Automatically create backup of existing licence when importing/editing licence 3099 Create backup of existing licence when changing licence details 3083 Allow network licence to be specified using hostname instead of IP address 3073 Improve error message when Hyperbolic BEM cannot find small strain stiffness 3008 Program opens files via File Manager without valid licence being present 2938 Allow the plan location of forces/moments to be tied to the locations of the piles 1713 Add single-pile design capabilities for tubular piles 1365 Add plots of tip resistance and shaft friction vs vertical displacement 792 Allow multiple load paths to be applied one after the other (rather than a single load path being applied) 760 Show maximum bending moments & forces along piles in "Key Results" report Repute 2.5 release 3 -------------------- Version 2.5.3.18031 Released 07/06/2018 Issues fixed (40 items): 3097 Access violation in module Scenarios.dll when deleting concrete from Project Manager 3093 Option 'Generate C2V file for HASP key' is not available from Sentinel Admin Control Centre 3092 Error searching for expression: 'AnnularSection.wall_thickness' 3091 Repute 2.5 Release 2 runs slowly across large Wide Area Networks 3089 Allow Repute setup program to run silently without prompting to install the Gemalto Sentinel drivers 3088 Plastic section modulus of pipe section is incorrect 3087 Boundary element analysis fails with message 'Error reading flags' 3085 Default weight density and angle of shearing resistance in Borehole Wizard do not match screenshot in Quick-Start Tutorial 3076 Increase minimum cover for pile cap to 50 mm and default to 150 mm 3074 Import Loads Wizard does not import the names of moments 3071 Action Wizard crashes after entering Force = (0, 0, 0) in Step 2 3069 Rotate commands perform apparently random rotations on pile group 3068 Add columns to Workbook to display pile base and shaft areas (in addition to equivalent diameters) 3067 Formula for Fleming's Analysis in Reference Manual is in error 3066 Add ability to save user interface changes from one session to the next 3065 Allow different plan shapes of pile cap (triangular/hexagonal/circular) to be specified 3064 Automatically increase/decrease scale on switching to/from Plan view 3063 Enhance 'Retrieve data from key' command to include ReAssurance details 3062 Error 'Not specified' when generating report containing a non-Custom alpha algorithm 3061 Increase the limit on pile length from 70 m to 126.1 m 3060 Longitudinal ULS Property Inspector allows beta algorithm to be selected at same time as Ks and delta algorithms 3059 Add support for LDSA Guidance Notes for ... Bored Piles in London Clay 3050 Split 'Links' group into 'Links' and 'Algorithms' 3048 List index out of bounds when changing Free-Standing Length of several piles in Workbook 3046 Pile orientation does not match the orientation of the pile group when created in the Pile Group Wizard 3042 Drawing Board does not display H-piles with proper orientation 3035 'Permanent' group is collapse on opening Property Inspector for Combination of Actions 3034 Change units for rock unconfined compressive strength to MPa in Borehole Wizard Step 4 3033 Item in Stockyard can be dragged into Project Manager even when disabled (applies to Trial edition) 3031 Cannot deselect limiting skin friction or end bearing algorithms 3028 Arrow depicting uniform surcharge is drawn too large 3019 Caption for Step 3. Enter the pile length and upstand should read 'Step 4' 3017 Warning message 'Using default value for alpha' appears multiple times in the Message Board 3016 Program is disabled when Trial Edition is selected 3013 Repute is slow or does not respond after running non-linear BEM analysis for pile group 3012 Reporter displays incorrect information 3009 Rock is always treated as drained soil in ULS verification 3007 Error occurred reading expression: 'CustomEN1997.factor_on_shearing_resistance' in RPX file from 2.0.22 2963 Display HASP API version in About Box credits screen 2935 The installer has insufficient privileges to modify this file: C:\ProgramData\Geocentrix\Repute2.log Repute 2.5 release 2 -------------------- Version 2.5.2.17138 Released 20/12/2017 Issues fixed (41 items): 3001 Maximum length of spun pile (= 18 m) is too limiting for practical use 2998 Unable to display the Reporter - error 'Not specified' 2997 Arrow head for moment points in wrong direction in combination of actions 2996 Program crashes with message "Assertion failed: intf != 0, file ... utilcls.h, line 2298" when running large BEA 2995 Error "bad lexical cast: source type value could not be interpreted as target" when opening RPX file created in v2.0.6 2994 "Error finding prototype from id = ''" occurs when creating Square, Spun, Micro, and Pipe piles via Pile Group Wizard 2993 Program fails to install via SCCM using SYSTEM account 2992 Avast Antivirus blocks communication between Repute and the Sentinel Licence Manager 2991 Could not connect to licence key attached to this computer, (status =42: Sentinel license manager version too old) 2990 Could not connect to a network licence key at address 10.160.5.82 (Status = 31: Requested Feature not available) 2989 Workbook's drop-down selection box does not update when calculation's name changes 2988 Default name for rock should be 'Rock 1' not 'Soil 1' 2981 Boundary Element Report does not display limiting skin friction or end bearing values 2980 Soil report does not display fcv, Eu, or Eu,max 2979 Beta value is calculated incorrectly when Option is set to Rollins et al. (for gravel) 2978 Randolph analysis does not abort when soil stiffness values are missing 2977 Cannot change the properties of a Custom Spun Pile Section (or a Custom Pipe Section) 2976 Run button should be hidden in release build of PGroupN 2973 Add note in Reference Manual that the self-weight of the pile cap is added to the loads on a pile group 2972 Error allocating memory for matrix 2971 In the Action Report, the resultant force and moment are displayed in engineering format and overflow the space allocated to them 2970 PGroupN's console window displays ** in time countdown 2969 Soil properties should report undrained stiffness as well as drained (if appropriate) 2967 Stockyard incorrectly displays panels for items that are not available 2966 The Sentinel Runtime Environment is not installed 2965 Error searching for expression: 'CustomEN1997.factor_on_shearing' 2964 Assertion failed (intf != 0 in file utilcls.h, line 2298) when dropping item from one instance of Repute to another 2958 Layer's wall friction drop-down box displays the wrong algorithms 2957 Boundary element report does not display pile cap results for linear-elastic analysis 2956 Cannot enter depth > 0 m for Standing Water Table 2955 PGroupN's title bar incorrectly states version as 2.17.5 instead of 2.17.6 2954 No error message generated when pile spacing < 1.5 D 2951 An error occurred while reading data for 'OrdnanceDatum': Error searching for expression: 'OrdnanceDatum.x_datum' 2950 An error occurred while reading data for 'Stage': The name 'Preliminary Pile Test' is already being used. Please choose a different name 2949 Force entry of IP address in correct format (xxx.xxx.x.xxx) 2946 Use Registry setting to detect presence of Sentinel drivers 2942 Output.xml does not report input values for rock k1-k5 2879 Units for extents are not written to config file (Repute2.cfg) 2623 Allow different X- and Y- spacings to be specified in the Pile Group Wizard 2332 Provide support for pre-stressed concrete spun piles with annular hole 2226 Provide summary table showing maximum values of structural effects for each pile Repute 2.5 release 1 -------------------- Version 2.5.1.17100 Released 18/08/2017 Issues fixed (5 items): 2945 Incorrect message displayed when ReAssurance has expired 2943 Reporter page of Program Options box is redundant 2910 Contents of User Manual should be revised for version 2.5 2876 Pure virtual function called when changing properties of Boundary Element Analysis 2797 Failed to load data from XML file: Repute 2.5 Release Candidate 3 (build 17087) -------------------------------------------- Version 2.5.0.17087 Released 15/08/2017 Issues fixed (7 items): 2941 Young's modulus of class C25 to C60 concretes is too low 2940 Load applied to pile group is ignored if it is not included in a Combination of Actions 2939 Layers are not listed in top-to-bottom order in Borehole's Select layers box (listed alphabetically instead) 2937 Sign of pile head rotation is displayed inconsistently 2936 No results are produced when running boundary element analysis 2932 X-rake appears in exponential format in Reporter 2701 Raise limit on concrete strength and stiffness to accomodate spun piles Repute 2.5 Release Candidate 2 (build 17085) -------------------------------------------- Version 2.5.0.17085 Released 09/08/2017 Issues fixed (16 items): 2934 Rakes are passed incorrectly to PGroupN via PGN file 2933 Rotation is displayed in different units in Reporter than elsewhere in the program 2931 Resultant moment does not display a sign in Property Inspector or Reporter 2930 Incorrect/missing data in Reporter 2929 bad_weak_ptr on entering small strain stiffness for clay soil 2928 Error message "boost::filesystem::create_directory" on running boundary element analysis 2926 Program crashes on creating pile group in Pile Group Wizard 2925 Program crashes on creating pile group containing a single pile in Pile Group Wizard 2923 Calculate pile lateral capacity in rock using expressions equivalent to those in BS 8004:2015 2920 Provide instructions for silent installation of Repute 2917 Actions are missing from report 2915 Pure virtual function called when changing soil/interface friction ratio 2844 Increase the limiting value of frictional resistance for piles in rocks above 200 kPa 2809 Allow boundary element analysis to perform ULS calculation with partial factors from design standard 2735 Store (x,y) co-ordinates of site datum 1465 A change to Poisson's ratio causes a change in E (but should change G) Repute 2.5 Release Candidate 1 (build 17080) -------------------------------------------- Version 2.5.0.17080 Released 03/08/2017 Issues fixed (25 items): 2922 Revise use of term 'rigid layer' now that support for rock has been added to the program 2921 Increase bearing pressure limit in algorithm to allow for piles bearing on rock 2918 Results for pile cap (settlement, force, moment, rotation) are missing from the Reporter 2916 Results differ between Windows and DOS version of PGroupN 2914 Assertion failed: intf != 0, file ..\utilcls.h, line 2298 2913 Input error: Layer type flag is not 1, 2, 3, or 4 2912 Contents of Quick-Start Guide should be revised for version 2.5 2911 Contents of Reference Manual should be revised for version 2.5 2909 Reporter shows unnecessary data for boundary element analysis 2908 Rock factors k1-k4 are missing from the Reporter 2907 Skin friction and bearing pressure limits are missing from the Reporter 2906 Information is missing from Reporter 2903 Program crashes when number of load increments is increased to 200 in BEM analysis 2901 Soil report does not record values of Young's modulus 2896 Disable non-linear options that are not used in boundary element analysis 2895 Program crashes on changing boundary element Stress-Strain Model to Hyperbolic 2894 Program crashes on changing Save Results flag 2893 Program crashes on re-opening project file 2892 Program crashes on changing rock layer to drained 2891 Change 'Is drained?' flag to 'Drained/Undrained' 2889 Default values of rock properties in Borehole Wizard are out of range in Property Inspector 2887 Cannot deselect 'Has Casing' flag for bored pile 2886 Mean elastic modulus for concrete should be displayed in GPa not MPa 2853 A pile with X-rake = 30 deg and Y-rake = -30 deg is incorrectly detected as an asymmetrically raked pile 2852 Cannot link Beta Algorithm to Soil Layer Repute 2.5 Beta 3 (build 17073) ------------------------------- Version 2.5.0.17073 Released 25/07/2017 Issues fixed (6 items): 2904 Increase default number of load increments in boundary element analysis to 200 2902 PGroupN engine does not use multi processor FORTRAN libraries 2900 Default value of rock k3 parameter is outside the allowable range 2898 Skin friction limit for second layer is ignored in multi-layer soil profile 2897 Reinstate ability to set global limits on skin friction and end bearing 2888 PGroupN calculation window shows strange values (è,h') Repute 2.5 Beta 2 (build 17054) ------------------------------- Version 2.5.0.17054 Released 23/06/2017 Issues fixed (11 items): 2880 Revise default layer averaging option (Poulos vs Yamashita) depending on the design situation 2878 Generated PGN file has strange values for phi/delta angles of Soil 2=sand 2877 PGN file includes an alpha value for rock, which is not needed 2876 Pure virtual function called when changing properties of Boundary Element Analysis 2875 Boundary Element Analysis displays wrong message when unable to generate PGN data for rock 2874 Program crashes changing BEA stress-strain model to hyperbolic when drainage condition is drained 2873 Problems caused by rock angle of shearing resistance of 30 degrees 2872 Borehole Wizard does not cater for invalid rock weight density 2871 Borehole Wizard does not provide facility to enter UCS for rock 2870 Borehole Wizard has not assigned rock to Layer 3 2869 Project Wizard is unable to navigate outside the Documents folder Repute 2.5 Beta 1 (build 17053) ------------------------------- Version 2.5.0.17053 Released 01/06/2017 Issues fixed (41 items): 2838 Project Manager should differentiate between calculations by using different icons 2835 Disregard specified design standard in Boundary Element Analysis created in Repute v2.0 and earlier 2834 "User options not found" appears as a Warning Message at program startup 2833 Messages should be sorted by date not time 2831 Message Board does not display duplicate messages even when generated some time apart 2830 Text is not visible on title bar on program startup on Windows 10 2829 Change default Boundary Element Analysis model to Linear Elastic 2825 Hide R factors for linear-elastic/perfectly-plastic model in Boundary Element Analysis Property Inspector 2817 Increase the available pile types in the Pile Group Wizard 2813 XML Project File does not display on Windows 10 ("Access is denied") 2811 Section is not copied when H-pile is duplicated 2808 Display name of design standard used in Longitudinal ULS calculation 2807 Cannot enter Ks value of 0.4 for normally consolidated soil 2799 Version number passed via PGN file is wrong 2796 Confusing error message on opening project: Unconfined strength of rock ... has been reset to 30 MPa (was previously 30 MPa) 2795 Program won't accept angle of shearing resistance (35 deg) within rock range (30-38 deg) 2794 Provide realistic limits to possible lengths and diameters of CFA piles 2793 Invalid cylinder strength is read on opening RPX file containing concrete with no cylinder strength specified 2784 Improve speed of program by linking with Intel's Maths Kernel Library (MKL) 2772 Promote non-linear options one level in Property Inspector for Boundary Element Analysis 2770 Stockyard shows redundant 'PipeSection' item under Pipes 2753 Check length specified for Spun Piles is possible 2737 Add C60 concrete grade 2729 Add scaling factor to combination of actions to allow < 100% of loads to be applied 2680 Relax the upper limit on dG/dz for lightly cemented sands 2673 Details of certain algorithms are missing from the Reference Manual 2603 Add square precast concrete driven piles to Pile Group Wizard 2537 Provide option to control expansion of tree view when Property Inspector is first displayed 2536 Add further pages to Program Options box, User Interface section 2487 Remove dependency on Aladdin HASP License Manager 2371 No units for Section/Diameter on second page of Pile Group Wizard 2125 Tubular piles are not available for selection in the Pile Group Wizard 2114 Provide ability to specify pile (x, y) co-ordinates by importing data from a spreadsheet 1999 Allow user to select which sections and materials appear in the Stockyard via a page in Program Options 1685 Browser page in Program Options box is redundant 1684 Units, Reports and XML pages in the Program Options box need amending 1439 Add driven concrete piles to the options available in the Pile Group Wizard 1434 Allow 'rounded' pile diameters to be entered via Pile Group Wizard 1372 Should not need to press ENTER to change check boxes settings in the Property Inspector 1326 Error loading XML document 'Output.xml' owing to ampersand '&' in Boundary Element Analysis name 1135 Project > Reset Datum does not automatically force refresh of Drawing Board Program files in the latest build --------------------------------- > indicates file has changed from the previous version ***Geocentrix executables*** > Repute2.exe (2.5.6) ***Geocentrix dynamic link libraries*** > Actions.dll (1.19.2) > Algorithms.dll (1.19.2) > BearingCoefficients.dll (1.19.2) > Boreholes.dll (3.19.2) > EarthCoefficients.dll (3.19.2) > Engineering.dll (4.19.2) > Geocentrix.dll (4.19.2) > Interfaces.dll (3.19.2) > Materials.dll (4.19.2) > Piles.dll (2.19.2) > Platform.dll (4.19.2) > Project.dll (4.19.2) > Reports.dll (1.19.2) > Repute.dll (2.19.2) > Repute1.dll (2.19.2) > RexML.dll (1.19.2) > RexUI.dll (1.19.2) > Scenarios.dll (1.19.2) > Sections.dll (1.19.2) > Soils.dll (4.19.2) > Standards.dll (3.19.2) > Surcharges.dll (3.19.2) > Surfaces.dll (3.19.2) > WaterTables.dll (4.19.2) ***Boost dynamic link libraries*** (dated 30/01/2018) boost_date_time-bcb-mt-1_39.dll boost_filesystem-bcb-mt-1_39.dll boost_serialization-bcb-mt-1_39.dll boost_system-bcb-mt-1_39.dll boost_thread-bcb-mt-1_39.dll ***CodeGear dynamic link libraries*** borlndmm.dll (25.0.29899.2631) cc32250mt.dll (1.144.0.0) ***CodeGear packages*** (dated 09/03/2018) bcbie250.bpl dbrtl250.bpl rtl250.bpl vcl250.bpl vcldb250.bpl vclimg250.bpl vclx250.bpl ***Curl libraries*** libcurl.dll (7.58.0.0) zlib1.dll (1.2.3.0) ***Developer Express packages*** (17.2.7, dated 29/05/2018) cxDataRS25.bpl cxEditorsRS25.bpl cxExportRS25.bpl cxGridRS25.bpl cxLibraryRS25.bpl cxPageControldxBarPopupMenuRS25.bpl cxPageControlRS25.bpl cxTreeListRS25.bpl cxVerticalGridRS25.bpl dxBarExtItemsRS25.bpl dxBarRS25.bpl dxComnRS25.bpl dxCoreRS25.bpl dxDockingRS25.bpl dxGDIPlusRS25.bpl dxLayoutControlRS25.bpl dxNavBarRS25.bpl dxOfficeCoreRS25.bpl dxPSCoreRS25.bpl dxPScxCommonRS25.bpl dxPScxExtCommonRS25.bpl dxPScxGridLnkRS25.bpl dxPScxPCProdRS25.bpl dxPScxTLLnkRS25.bpl dxPScxVGridLnkRS25.bpl dxPSdxLCLnkRS25.bpl dxPSdxSpreadSheetRS25.bpl dxPSLnksRS25.bpl dxPSPrVwAdvRS25.bpl dxPSPrVwRibbonRS25.bpl dxPSTeeChartRS25.bpl dxRibbonRS25.bpl dxRibbonCustomizationFormRS25.bpl dxServerModeRS25.bpl dxSkinOffice2007BlackRS25.bpl dxSkinOffice2007BlueRS25.bpl dxSkinOffice2007GreenRS25.bpl dxSkinOffice2007SilverRS25.bpl dxSkinsCoreRS25.bpl dxSpreadSheetRS25.bpl dxSpreadSheetCoreRS25.bpl dxSpreadSheetCoreDialogsRS25.bpl dxThemeRS25.bpl ***FastReport packages*** frx25.bpl (5.6.15) fs25.bpl (5.6.15) ***Intel libraries*** libmmd.dll (18.0.0.0) libifcoremd.dll (18.0.1.0) ***MJ Freelancing packages*** (dated 18/08/2017) MJFClangC25.bpl (1.0.0) ***OCXs*** hhctrl.ocx (5.2.3790.4110) ***Raize Software packages*** DropMasterVcl250.bpl (2.4.9) ***Sentinel dynamic link libraries*** hasp_windows_48297.dll (7.50.4258.60000) sntl_adminapi_windows.dll (7.5.675.60000) sntl_licgen_windows.dll (7.5.4438.60000) ***Steema TeeChart packages*** Tee925.bpl TeePro925.bpl TeeUI925.bpl TeeUser9.hlp (07/06/2007) ***other files*** Repute2.exe.manifest (10/02/2006) Help\ Repute2.chm (22/09/2009) Manuals\ > Repute 2 Quick-Start Guide.pdf (19/12/2019) Repute 2 Reference Manual.pdf (19/11/2018) Repute 2 User Manual.pdf (01/06/2017) Materials\ Concretes\ (all 15/08/2017) BS 8110\ C25.xml C30.xml C35.xml C40.xml C45.xml C50.xml C60.xml C80.xml C90.xml EN 206\ (all 22/06/2010, except where noted) C8-10.xml (15/08/2017) C12-15.xml C16-20.xml C20-25.xml C25-30.xml C30-37.xml C35-45.xml C40-50.xml C45-55.xml C50-60.xml C55-67.xml (08/12/2017) C60-75.xml (08/12/2017) C70-85.xml (08/12/2017) C80-95.xml (08/12/2017) C90-105.xml (08/12/2017) C100-115.xml (08/12/2017) Steels\ (all 27/09/2016) BS 4360 Specification for weldable structural steels\ 43.xml 50.xml 55.xml Corus\ Advance 275.xml Advance 355.xml EN 10025 Hot-rolled products of structural steel\ Legacy\ Fe360.xml Fe430.xml Fe510.xml E295.xml E335.xml E360.xml S185.xml S235.xml S275.xml S355.xml S450.xml EN 10248 Hot-rolled sheet piling of non allo steels\ S240GP.xml S270GP.xml S320GP.xml S355GP.xml S390GP.xml S430GP.xml PGroupN\ libiomp5md.dll (5.0.2009.811) PGroupN2.exe (2.17.7.17100) Release Notes\ > Readme.rtf (19/12/2019) > Repute2.5.6.txt (19/12/2019) Reports\ Master.fr3 (10/02/2009) Report.html (31/07/2006) Report.xml (31/07/2006) Repute2.fr3 (2.5.4) 02/11/2018 Generated\ readme.txt (29/06/06) HTML\ (Include).xslt (all 30/07/2006, except *) Actions.xslt Algorithms.xslt All Items.xslt Calculations.xslt Design Standards.xslt Geometrical Objects.xslt Geotechnical Constituents.xslt Materials.xslt Project Information.xslt ReportNotAvailable.html* 27/06/2003 Scenarios.xslt Sections.xslt Structural Elements.xslt Icons\ (various) PGroupN\ PGroupN-Input.xslt Stylesheets\ Repute.css SVG\ SVG.xslt Welcome\ Geocentrix.gif (10/05/2005) Geomarc.gif (28/11/2006) Repute.css (11/01/2017) Repute.gif (13/05/2005) Repute.html (26/05/2017) WordML\ (various) Sections\ Bearing Piles\ ArcelorMittal\ HP\ HP ### x ##.xml (44 files with various names) HZ\ HZ xxxxM xx.xml (12 files with various names) BS 4 Structural Steel Sections\ UBP ###x###x###.xml (17 files with various names) Corus\ Advance\ UKBP ###x###x###.xml (17 files with various names) Legacy\ (all 05/01/2016) UKC ###x###x###.xml (22 files with various names) European wide flange beams\ HEA\ HEA xxx.xml (14 files with various names) HEB\ HEB xxx.xml (24 files with various names) HEM\ HEM xxx.xml (14 files with various names) Pipes\ (all 17/12/2010, except *) ANSI B36 Welded and Seamless Wrought Steel Pipe\ (all 27/09/2016) NPS## x #.###.xml (various names) Corus\ (all 17/12/2016) Celcius ##.# x #.#.xml (various names) Spun Piles\ ICP\ (total of 41 sections) ICP ##A###.xml (various names) ICP ##B###.xml (various names) ICP ##C###.xml (various names) ICP ##D###.xml (various names) MS 1314 Precast concrete products\ (mainly 13/07/2016) Spun Pile ###A.xml (various names) Spun Pile ###B.xml (various names) Spun Pile ###C.xml (various names) Templates\ Blank.rpx Cancel product.xml Cancel subscription.xml haspscope.xml Licence.xml Network licence.xml Read-only memory.xml Read-write memory.xml Standalone memory.xml Subscription.xml Template for importing actions.xlsx Template for importing pile group.xlsx (19/07/2019) ***ProgramData\Geocentrix\Repute\2.5*** MRU.ini (29/10/2010) Repute2.cfg (01/11/2010) Repute2.lic (29/10/2010) Repute2.log (29/10/2010) Materials\ Concretes\ C12-15.xml C16-20.xml C20-25.xml C25-30.xml C30-37.xml C35-45.xml C40-50.xml C45-55.xml C50-60.xml Steels\ S235.xml S275.xml S355.xml S450.xml Sections\ Bearing Piles\ HP 8 x 36.xml to HP 400 x 140.xml UKBP 203x203x 45.xml to UKBP 356x356x174.xml Pipes\ NPS24 x 0.500.xml to NPS78 x 1.000.xml Spun Pipes\ Spun Pipe 250B.xml to Spun Pipe 120B.xml ***Sentinel HASP/LDK Windows Run-time Installers*** Setup\ inventory.txt Firmware Update\ FirmwareUpdate.exe (7.5.1.62469) readme.html HASP\ License Manager Setup (Win32)\ 135-Install_LM_Under_Windows_7.pdf lmsetup.exe (8.32.5.40) readme.html Removal Tool\ aksinstdel_windows.exe (1.0.22017.1) readme.html Sentinel HASP-LDK\ Windows Run-time EnviromentInstallers\ Command-line Installer\ command line switches.txt (09/11/2016) > haspdinst.exe (7.102.28955.1) > readme.html (07/11/2019) GUI Installer\ > HASPUserSetup.exe (7.102.34507.60000) > readme.html (07/11/2019) ***Users\Public\Documents\Geocentrix\Repute\2.5*** Benchmarks\ (all 07/08/2019) Basile-linear (2003).rpx Basile-non-linear (2003).rpx RPT-001.rpx RPT-002.rpx RPT-004.rpx Examples\ (all 06/08/2019, except where noted) Import\ Actions after import.rpx (21/11/2018) Actions for import.xlsx (21/11/2018) Pile Group after import.rpx (06/08/2019) Pile Group for import.xlsx (19/07/2019) Bond and Harris (2008) Ex 13.1.rpx Fleming (1992).rpx Fleming et al Chapter 4 Example 1 (1992).rpx Large circular group. Randolph (1992).rpx Tomlinson (1994).rpx Tutorials\ Tutorial 1\ (all 17/12/2019) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Tutorial 1.rpx Tutorial 2\ (all 17/12/2019) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Tutorial 2.rpx Tutorial 3\ (all 17/12/2019) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Step7.rpx > Tutorial 3.rpx Tutorial 4\ (all 19/12/2019) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Tutorial 4.rpx Tutorial 5\ (all 19/12/2019) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Tutorial 5.rpx > Tutorial 5.xlsx Tutorial 6\ (all 19/12/2019) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Tutorial 4.rpx > Tutorial 6.rpx ------------------------------- End of release notes -------------------------------