----------------------------
Release notes for Repute 2.5
----------------------------
©2002-17 Geocentrix Ltd. All rights reserved.
"Geocentrix" and "Repute" are registered trademarks of Geocentrix Ltd.

Last updated: 20/12/2017

Contents:
	Repute 2.5 Release 2
	Repute 2.5 Release 1
	Repute 2.5 Release Candidate 3
	Repute 2.5 Release Candidate 2
	Repute 2.5 Release Candidate 1
	Repute 2.5 Beta 3
	Repute 2.5 Beta 2
	Repute 2.5 Beta 1
	Program files in the latest build
		
		
Repute 2.5 release 2
--------------------
Version 2.5.2.17138
Released 20/12/2017

Issues fixed (41 items):

3001	Maximum length of spun pile (= 18 m) is too limiting for practical use
2998	Unable to display the Reporter - error 'Not specified'
2997	Arrow head for moment points in wrong direction in combination of actions
2996	Program crashes with message "Assertion failed: intf != 0, file ... utilcls.h, line 2298" when running large BEA
2995	Error "bad lexical cast: source type value could not be interpreted as target" when opening RPX file created in v2.0.6
2994	"Error finding prototype from id = '<ID/>'" occurs when creating Square, Spun, Micro, and Pipe piles via Pile Group Wizard
2993	Program fails to install via SCCM using SYSTEM account
2992	Avast Antivirus blocks communication between Repute and the Sentinel Licence Manager
2991	Could not connect to licence key attached to this computer, (status =42: Sentinel license manager version too old)
2990	Could not connect to a network licence key at address 10.160.5.82 (Status = 31: Requested Feature not available)
2989	Workbook's drop-down selection box does not update when calculation's name changes
2988	Default name for rock should be 'Rock 1' not 'Soil 1'
2981	Boundary Element Report does not display limiting skin friction or end bearing values
2980	Soil report does not display fcv, Eu, or Eu,max
2979	Beta value is calculated incorrectly when Option is set to Rollins et al. (for gravel)
2978	Randolph analysis does not abort when soil stiffness values are missing
2977	Cannot change the properties of a Custom Spun Pile Section (or a Custom Pipe Section)
2976	Run button should be hidden in release build of PGroupN
2973	Add note in Reference Manual that the self-weight of the pile cap is added to the loads on a pile group
2972	Error allocating memory for matrix
2971	In the Action Report, the resultant force and moment are displayed in engineering format and overflow the space allocated to them
2970	PGroupN's console window displays ** in time countdown
2969	Soil properties should report undrained stiffness as well as drained (if appropriate)
2967	Stockyard incorrectly displays panels for items that are not available
2966	The Sentinel Runtime Environment is not installed
2965	Error searching for expression: 'CustomEN1997.factor_on_shearing'
2964	Assertion failed (intf != 0 in file utilcls.h, line 2298) when dropping item from one instance of Repute to another
2958	Layer's wall friction drop-down box displays the wrong algorithms
2957	Boundary element report does not display pile cap results for linear-elastic analysis
2956	Cannot enter depth > 0 m for Standing Water Table
2955	PGroupN's title bar incorrectly states version as 2.17.5 instead of 2.17.6
2954	No error message generated when pile spacing < 1.5 D
2951	An error occurred while reading data for 'OrdnanceDatum': Error searching for expression: 'OrdnanceDatum.x_datum'
2950	An error occurred while reading data for 'Stage': The name 'Preliminary Pile Test' is already being used. Please choose a different name
2949	Force entry of IP address in correct format (xxx.xxx.x.xxx)
2946	Use Registry setting to detect presence of Sentinel drivers
2942	Output.xml does not report input values for rock k1-k5
2879	Units for extents are not written to config file (Repute2.cfg)
2623	Allow different X- and Y- spacings to be specified in the Pile Group Wizard
2332	Provide support for pre-stressed concrete spun piles with annular hole
2226	Provide summary table showing maximum values of structural effects for each pile


Repute 2.5 release 1
--------------------
Version 2.5.1.17100
Released 18/08/2017

Issues fixed (5 items):

2945	Incorrect message displayed when ReAssurance has expired
2943	Reporter page of Program Options box is redundant
2910	Contents of User Manual should be revised for version 2.5
2876	Pure virtual function called when changing properties of Boundary Element Analysis
2797	Failed to load data from XML file: <Displacement axis="X" value="**" units="m"/>


Repute 2.5 Release Candidate 3 (build 17087)
--------------------------------------------
Version 2.5.0.17087
Released 15/08/2017

Issues fixed (7 items):

2941	Young's modulus of class C25 to C60 concretes is too low
2940	Load applied to pile group is ignored if it is not included in a Combination of Actions
2939	Layers are not listed in top-to-bottom order in Borehole's Select layers box (listed alphabetically instead)
2937	Sign of pile head rotation is displayed inconsistently
2936	No results are produced when running boundary element analysis
2932	X-rake appears in exponential format in Reporter
2701	Raise limit on concrete strength and stiffness to accomodate spun piles


Repute 2.5 Release Candidate 2 (build 17085)
--------------------------------------------
Version 2.5.0.17085
Released 09/08/2017

Issues fixed (16 items):

2934	Rakes are passed incorrectly to PGroupN via PGN file
2933	Rotation is displayed in different units in Reporter than elsewhere in the program
2931	Resultant moment does not display a sign in Property Inspector or Reporter
2930	Incorrect/missing data in Reporter
2929	bad_weak_ptr on entering small strain stiffness for clay soil
2928	Error message "boost::filesystem::create_directory" on running boundary element analysis
2926	Program crashes on creating pile group in Pile Group Wizard
2925	Program crashes on creating pile group containing a single pile in Pile Group Wizard
2923	Calculate pile lateral capacity in rock using expressions equivalent to those in BS 8004:2015
2920	Provide instructions for silent installation of Repute
2917	Actions are missing from report
2915	Pure virtual function called when changing soil/interface friction ratio
2844	Increase the limiting value of frictional resistance for piles in rocks above 200 kPa
2809	Allow boundary element analysis to perform ULS calculation with partial factors from design standard
2735	Store (x,y) co-ordinates of site datum
1465	A change to Poisson's ratio causes a change in E (but should change G)


Repute 2.5 Release Candidate 1 (build 17080)
--------------------------------------------
Version 2.5.0.17080
Released 03/08/2017

Issues fixed (25 items):

2922	Revise use of term 'rigid layer' now that support for rock has been added to the program
2921	Increase bearing pressure limit in algorithm to allow for piles bearing on rock
2918	Results for pile cap (settlement, force, moment, rotation) are missing from the Reporter
2916	Results differ between Windows and DOS version of PGroupN
2914	Assertion failed: intf != 0, file ..\utilcls.h, line 2298
2913	Input error: Layer type flag is not 1, 2, 3, or 4
2912	Contents of Quick-Start Guide should be revised for version 2.5
2911	Contents of Reference Manual should be revised for version 2.5
2909	Reporter shows unnecessary data for boundary element analysis
2908	Rock factors k1-k4 are missing from the Reporter
2907	Skin friction and bearing pressure limits are missing from the Reporter
2906	Information is missing from Reporter
2903	Program crashes when number of load increments is increased to 200 in BEM analysis
2901	Soil report does not record values of Young's modulus
2896	Disable non-linear options that are not used in boundary element analysis
2895	Program crashes on changing boundary element Stress-Strain Model to Hyperbolic
2894	Program crashes on changing Save Results flag
2893	Program crashes on re-opening project file
2892	Program crashes on changing rock layer to drained
2891	Change 'Is drained?' flag to 'Drained/Undrained'
2889	Default values of rock properties in Borehole Wizard are out of range in Property Inspector
2887	Cannot deselect 'Has Casing' flag for bored pile
2886	Mean elastic modulus for concrete should be displayed in GPa not MPa
2853	A pile with X-rake = 30 deg and Y-rake = -30 deg is incorrectly detected as an asymmetrically raked pile
2852	Cannot link Beta Algorithm to Soil Layer


Repute 2.5 Beta 3 (build 17073)
-------------------------------
Version 2.5.0.17073
Released 25/07/2017

Issues fixed (6 items):

2904	Increase default number of load increments in boundary element analysis to 200
2902	PGroupN engine does not use multi processor FORTRAN libraries
2900	Default value of rock k3 parameter is outside the allowable range
2898	Skin friction limit for second layer is ignored in multi-layer soil profile
2897	Reinstate ability to set global limits on skin friction and end bearing
2888	PGroupN calculation window shows strange values (è,h')


Repute 2.5 Beta 2 (build 17054)
-------------------------------
Version 2.5.0.17054
Released 23/06/2017

Issues fixed (11 items):

2880	Revise default layer averaging option (Poulos vs Yamashita) depending on the design situation
2878	Generated PGN file has strange values for phi/delta angles of Soil 2=sand
2877	PGN file includes an alpha value for rock, which is not needed
2876	Pure virtual function called when changing properties of Boundary Element Analysis
2875	Boundary Element Analysis displays wrong message when unable to generate PGN data for rock
2874	Program crashes changing BEA stress-strain model to hyperbolic when drainage condition is drained
2873	Problems caused by rock angle of shearing resistance of 30 degrees
2872	Borehole Wizard does not cater for invalid rock weight density
2871	Borehole Wizard does not provide facility to enter UCS for rock
2870	Borehole Wizard has not assigned rock to Layer 3
2869	Project Wizard is unable to navigate outside the Documents folder 


Repute 2.5 Beta 1 (build 17053)
-------------------------------
Version 2.5.0.17053
Released 01/06/2017

Issues fixed (41 items):

2838	Project Manager should differentiate between calculations by using different icons
2835	Disregard specified design standard in Boundary Element Analysis created in Repute v2.0 and earlier
2834	"User options not found" appears as a Warning Message at program startup
2833	Messages should be sorted by date not time
2831	Message Board does not display duplicate messages even when generated some time apart
2830	Text is not visible on title bar on program startup on Windows 10
2829	Change default Boundary Element Analysis model to Linear Elastic
2825	Hide R factors for linear-elastic/perfectly-plastic model in Boundary Element Analysis Property Inspector
2817	Increase the available pile types in the Pile Group Wizard
2813	XML Project File does not display on Windows 10 ("Access is denied")
2811	Section is not copied when H-pile is duplicated
2808	Display name of design standard used in Longitudinal ULS calculation
2807	Cannot enter Ks value of 0.4 for normally consolidated soil
2799	Version number passed via PGN file is wrong
2796	Confusing error message on opening project: Unconfined strength of rock ... has been reset to 30 MPa (was previously 30 MPa)
2795	Program won't accept angle of shearing resistance (35 deg) within rock range (30-38 deg)
2794	Provide realistic limits to possible lengths and diameters of CFA piles
2793	Invalid cylinder strength is read on opening RPX file containing concrete with no cylinder strength specified
2784	Improve speed of program by linking with Intel's Maths Kernel Library (MKL)
2772	Promote non-linear options one level in Property Inspector for Boundary Element Analysis
2770	Stockyard shows redundant 'PipeSection' item under Pipes
2753	Check length specified for Spun Piles is possible
2737	Add C60 concrete grade
2729	Add scaling factor to combination of actions to allow < 100% of loads to be applied
2680	Relax the upper limit on dG/dz for lightly cemented sands
2673	Details of certain algorithms are missing from the Reference Manual
2603	Add square precast concrete driven piles to Pile Group Wizard
2537	Provide option to control expansion of tree view when Property Inspector is first displayed
2536	Add further pages to Program Options box, User Interface section
2487	Remove dependency on Aladdin HASP License Manager
2371	No units for Section/Diameter on second page of Pile Group Wizard
2125	Tubular piles are not available for selection in the Pile Group Wizard
2114	Provide ability to specify pile (x, y) co-ordinates by importing data from a spreadsheet
1999	Allow user to select which sections and materials appear in the Stockyard via a page in Program Options
1685	Browser page in Program Options box is redundant
1684	Units, Reports and XML pages in the Program Options box need amending
1439	Add driven concrete piles to the options available in the Pile Group Wizard
1434	Allow 'rounded' pile diameters to be entered via Pile Group Wizard
1372	Should not need to press ENTER to change check boxes settings in the Property Inspector
1326	Error loading XML document 'Output.xml' owing to ampersand '&' in Boundary Element Analysis name
1135	Project > Reset Datum does not automatically force refresh of Drawing Board
 
 
Program files in the latest build
---------------------------------
> indicates file has changed from the previous version

***Geocentrix executables***
> Repute2.exe (2.5.2)

***Geocentrix dynamic link libraries***
 Actions.dll (1.17.1)
> Algorithms.dll (1.17.2)
 BearingCoefficients.dll (1.17.1)
 Boreholes.dll (3.17.1)
 EarthCoefficients.dll (3.17.1)
 Engineering.dll (4.17.1)
> Geocentrix.dll (4.17.2)
 Grounds.dll (3.17.1)
 Interfaces.dll (3.17.1)
 Materials.dll (4.17.1)
> Piles.dll (2.17.2)
 Platform.dll (4.17.1)
 Project.dll (4.17.1)
> Reports.dll (1.17.2)
> Repute.dll (2.17.2)
 Repute1.dll (2.17.1)
> RexML.dll (1.17.2)
 RexUI.dll (1.17.1)
> Scenarios.dll (1.17.2)
> Sections.dll (1.17.2)
> Soils.dll (4.17.2)
 Standards.dll (3.17.1)
 Surcharges.dll (3.17.1)
> WaterTables.dll (4.17.2)

***Boost dynamic link libraries***
 boost_date_time-bcb-mt-1_34_1.dll
 boost_program_options-bcb-mt-1_34_1.dll
 boost_signals-bcb-mt-1_34_1.dll
 boost_thread-bcb-mt-1_34_1.dll

***CodeGear dynamic link libraries***
 borlndmm.dll (11.0.2902.10471)
 cc3280mt.dll (8.0.0.2)

***CodeGear packages***
 bcbie100.bpl (11.0.2902.10471)
 dbrtl100.bpl (11.0.2902.10471)
 rtl100.bpl (11.0.2902.10471)
 vcl100.bpl (11.0.2902.10471)
 vcldb100.bpl (11.0.2902.10471)
 vcljpg100.bpl (11.0.2902.10471)
 vclx100.bpl (11.0.2902.10471)

***Developer Express packages***
***all (2013.2.4)***
 cxDataRS11.bpl
 cxEditorsRS11.bpl
 cxExportRS11.bpl
 cxGridRS11.bpl
 cxLibraryRS11.bpl
 cxPageControldxBarPopupMenuRS11.bpl
 cxPageControlRS11.bpl
 cxSpreadSheetRS11.bpl
 cxTreeListRS11.bpl
 cxVerticalGridRS11.bpl
 dxBarExtItemsRS11.bpl
 dxBarRS11.bpl
 dxComnRS11.bpl
 dxCoreRS11.bpl
 dxDockingRS11.bpl
 dxGDIPlusRS11.bpl
 dxLayoutControlRS11.bpl
 dxNavBarRS11.bpl
 dxPSCoreRS11.bpl
 dxPScxCommonRS11.bpl
 dxPScxExtCommonRS11.bpl
 dxPScxGridLnkRS11.bpl
 dxPScxPCProdRS11.bpl
 dxPScxTLLnkRS11.bpl
 dxPScxVGridLnkRS11.bpl
 dxPSdxLCLnkRS11.bpl
 dxPSLnksRS11.bpl
 dxPSPrVwAdvRS11.bpl
 dxPSPrVwRibbonRS11.bpl 
 dxPSTeeChartRS11.bpl 
 dxRibbonRS11.bpl
 dxRibbonCustomizationFormRS11.bpl
 dxServerModeRS11.bpl 
 dxSkinOffice2007BlackRS11.bpl
 dxSkinOffice2007BlueRS11.bpl
 dxSkinOffice2007GreenRS11.bpl
 dxSkinOffice2007SilverRS11.bpl
 dxSkinsCoreRS11.bpl 
 dxSkinscxPCPainterRS11.bpl 
 dxSkinsdxBarPainterRS11.bpl
 dxSkinsdxDLPainterRS11.bpl
 dxSkinsdxNavBarPainterRS11.bpl
 dxSkinsdxRibbonPainterRS11.bpl
 dxThemeRS11.bpl 

***FastReport packages***
***all (5.5.11)***
 frx11.bpl
 fs11.bpl

***MJ Freelancing packages***
 MJFAFSystemC11.bpl (3.6.0.11)

***OCXs***
 hhctrl.ocx (5.2.3790.4110)

***Raize Software packages***
 DM15_100.bpl (1.5.2.0)

***Sentinel dynamic link libraries***
 hasp_windows_48297.dll (7.1.1.42508)
 sntl_admin_api_windows.dll (6.0.1.41705)
 sntl_licgen_windows.dll (7.4.1.55968)
 
***Steema TeeChart packages***
***all (9.0.7.121105)***
 Tee911.bpl
 TeePro911.bpl
 TeeUI911.bpl 
 TeeUser9.hlp (07/06/2007)

***other files***
 Repute2.exe.manifest (10/02/2006)

Help\
  Repute2.chm (22/09/2009)

Manuals\
  Repute 2 Quick-Start Guide.pdf (26/05/2017)
  Repute 2 Reference Manual.pdf (01/06/2017)
  Repute 2 User Manual.pdf (01/06/2017)

Materials\
  Concretes\ (all 15/08/2017)
    BS 8110\ 
      C25.xml 
      C30.xml 
      C35.xml 
      C40.xml 
      C45.xml 
      C50.xml 
      C60.xml
      C80.xml
      C90.xml
    EN 206\ (all 22/06/2010, except where noted)
      C8-10.xml (15/08/2017)
      C12-15.xml
      C16-20.xml
      C20-25.xml
      C25-30.xml
      C30-37.xml
      C35-45.xml
      C40-50.xml
      C45-55.xml
      C50-60.xml
      C55-67.xml (08/12/2017)
      C60-75.xml (08/12/2017)
      C70-85.xml (08/12/2017)
      C80-95.xml (08/12/2017)
      C90-105.xml (08/12/2017)
      C100-115.xml (08/12/2017)

  Steels\   (all 27/09/2016)
    BS 4360 Specification for weldable structural steels\
      43.xml 
      50.xml
      55.xml

    Corus\
      Advance 275.xml
      Advance 355.xml

    EN 10025 Hot-rolled products of structural steel\
      Legacy\
        Fe360.xml
        Fe430.xml
        Fe510.xml
      E295.xml
      E335.xml
      E360.xml
      S185.xml
      S235.xml
      S275.xml
      S355.xml
      S450.xml

    EN 10248 Hot-rolled sheet piling of non allo steels\
      S240GP.xml
      S270GP.xml
      S320GP.xml
      S355GP.xml
      S390GP.xml
      S430GP.xml

PGroupN\
  libiomp5md.dll (5.0.2009.811)
>  PGroupN2.exe (2.17.7.17100)

Projects\
  Benchmarks\ (all 23/01/2014)
    RPT-001.rpx
    RPT-002.rpx
    RPT-003.rpx

  Examples\ (all 22/01/2014)
    Bond and Harris (2008) Ex 13.1.rpx
    Fleming (1992).rpx
    Fleming et al Chapter 4 Example 1 (1992).rpx
    Large circular group.rpx
    Randolph (1992).rpx
    Tomlinson (1994).rpx

  PGroup\
    Problem1.pg (12/09/2002)

  PGroupN\
    2D-Linear.pgn (26/04/2002)
    etc...

  Repute 1
    Tutorial 1\ (all 24/05/2004, except *)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step6.pgn* 11/01/2009
      Step6.rpx
      Step6.xml* 11/01/2009

    Tutorial 2\ (all 24/05/2004, except *)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step5.rpx
      Step8.pgn* 11/01/2009
      Step8.rpx
      Step8.xml* 11/01/2009

    Tutorial 3\ (all 24/05/2004, except *)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.pgn* 11/01/2009
      Step4.rpx
      Step4.xml* 11/01/2009
      Tutorial1.rpx

  Templates\
    (empty)

  Tutorials\
    Tutorial 1\ (all 25/05/2017)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step5.rpx
	   Step6.rpx
	   Step7.rpx
      Tutorial 1.rpx

    Tutorial 2\ (all 04-25/05/2017)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step5.rpx
	   Step6.rpx
	   Step7.rpx
      Tutorial 2.rpx

    Tutorial 3\ (all 25/05/2017)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step5.rpx
	   Step6.rpx
	   Step7.rpx
	   Step8.rpx
	   Step9.rpx
      Tutorial 3.rpx

    Tutorial 4\ (all 25/05/2017)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step5.rpx
	   Step6.rpx
      Tutorial 4.rpx

    Tutorial 5\ (all 26/04/2017, except*)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Step5.rpx
	  Step6.rpx
      Tutorial 5.rpx
      Tutorial 5.xls* 29/10/2013

    Tutorial 6\ (all 27/04/2017)
      Step1.rpx
      Step2.rpx
      Step3.rpx
      Step4.rpx
      Tutorial 4.rpx
      Tutorial 6.rpx

Release Notes\
> Readme.rtf (20/12/2017)
> Repute2.5.2.txt (20/12/2017)

Reports\
  Master.fr3 (10/02/2009)
  Report.html (31/07/2006)
  Report.xml (31/07/2006)
>  Repute2.fr3 (27/11/2017)

  Generated\
    readme.txt (29/06/06)

  HTML\
    (Include).xslt (all 30/07/2006, except *)
    Actions.xslt
    Algorithms.xslt
    All Items.xslt
    Calculations.xslt
    Design Standards.xslt
    Geometrical Objects.xslt
    Geotechnical Constituents.xslt
    Materials.xslt
    Project Information.xslt
    ReportNotAvailable.html* 27/06/2003
    Scenarios.xslt
    Sections.xslt
    Structural Elements.xslt

  Icons\
    (various)

  PGroupN\
    PGroupN-Input.xslt

  Stylesheets\
    Repute.css

  SVG\
    SVG.xslt

  Welcome\
    Atkins.gif (07/01/2011)
    Corus.gif (01/09/2009)
    Geocentrix.gif (10/05/2005)
    Geomarc.gif (28/11/2006)
    Repute.css (11/01/2017)
    Repute.gif (13/05/2005)
    Repute.html (26/05/2017)
    Stent.gif (07/01/2011)

  WordML\
    (various)
    
Sections\
  Bearing Piles\ (all 29/08/2008)
    ArcelorMittal\ (all 12/01/2016, except *)
      HP\ (all 18-19/10/2016, except *)
	    HP ### x ##.xml (various names)
      HZ\ (all 19/10/2016, except *)
	    HZ 680M LT.xml
	    HZ 880M A.xml	
	    HZ 880M B.xml
	    HZ 880M C.xml
	    HZ 1080M A.xml	
	    HZ 1080M B.xml
	    HZ 1080M C.xml
	    HZ 1080M D.xml
	    HZ 1180M A.xml	
	    HZ 1180M B.xml
	    HZ 1180M C.xml
	    HZ 1180M D.xml
    BS 4 Structural Steel Sections\ (all 20/01/2016)
        UKB ###x###x###.xml (various names)
    Corus\
      Advance\ (all 05/01/2016)
        UKBP ###x###x###.xml (various names)
      Legacy\ (all 05/01/2016)
        UKC ###x###x###.xml (various names)
    Wide flange beams\
      HE140B.xml (05/01/2016)

  Pipes\	 (all 17/12/2010, except *) 
    ANSI B36 Welded and Seamless Wrought Steel Pipe\  (all 27/09/2016)
      NPS## x #.###.xml (various names)
    Corus\  (all 17/12/2016)
      Celcius ##.# x #.#.xml (various names)

  Spun Piles\	 
    ICP\  (all 08/12/2015, except *)
      ICP ##A###.xml (various names)
      ICP ##B###.xml (various names)
      ICP ##C###.xml (various names)
      ICP ##D###.xml (various names)
    MS 1314 Precast concrete products\  (mainly 13/07/2016)
	  Spun Pile ###A.xml (various names)
	  Spun Pile ###B.xml (various names)
	  Spun Pile ###C.xml (various names)


***ProgramData\Geocentrix\Repute\2.5***
 MRU.ini (29/10/2010)
 Repute2.cfg (01/11/2010)
 Repute2.lic (29/10/2010)
 Repute2.log (29/10/2010)

 Materials\ 
   Concretes\ 
	 C16-20.xml
     C20-25.xml
     C25-30.xml
     C30-37.xml
     C35-45.xml
     C40-50.xml
     C45-55.xml
     C50-60.xml

    Steels\
     S235.xml
     S275.xml
     S355.xml
     S450.xml

 Sections\ 
   Bearing Piles\ 
	 HP 8 x 36.xml to HP 400 x 140.xml
	 UKBP 203x203x 45.xml to UKBP 356x356x174.xml

   Pipes\ 
	 NPS24 x 0.500.xml to NPS78 x 1.000.xml

   Spun Pipes\ 
	 Spun Pipe 250B.xml to Spun Pipe 120B.xml

***Sentinel HASP/LDK Windows Run-time Installers***
Setup\
  inventory.txt
  Firmware Update\
	FirmwareUpdate.exe (7.5.1.62469)
	readme.html
  HASP\
    License Manager Setup (Win32)\
	  135-Install_LM_Under_Windows_7.pdf
	  lmsetup.exe (8.32.5.40)
	  readme.html
	Removal Tool\
	  aksinstdel_windows.exe (1.0.22017.1)
	  readme.html
  Sentinel HASP-LDK\
    Windows Run-time EnviromentInstallers\
	  Command-line Installer\
>		haspdinst.exe (7.63.8991.1)
>		readme.html
	  GUI Installer\
>		HASPUserSetup.exe (7.63.14528.60000)
>		readme.html
 
-------------------------------
End of release notes
-------------------------------