----------------------------
Release notes for Repute 2.5
----------------------------
©2002-21 Geocentrix Ltd. All rights reserved.
"Geocentrix" and "Repute" are registered trademarks of Geocentrix Ltd.

Last updated: 27/04/2021

Contents:
	Repute 2.5 Release 10
	Repute 2.5 Release 9
	Repute 2.5 Release 8
	Repute 2.5 Release 7
	Repute 2.5 Release 6
	Repute 2.5 Release 5
	Repute 2.5 Release 4
	Repute 2.5 Release 3
	Repute 2.5 Release 2
	Repute 2.5 Release 1
	Repute 2.5 Release Candidate 3
	Repute 2.5 Release Candidate 2
	Repute 2.5 Release Candidate 1
	Repute 2.5 Beta 3
	Repute 2.5 Beta 2
	Repute 2.5 Beta 1
	Program files in the latest build

		
Repute 2.5 release 10
---------------------
Version 2.5.10.20211
Released 27/04/2021

Improvements made: 74
3573	Number of pile elements must be >=3 and <= 50. Value entered = 5
3571	Borehole Wizard calculates wrong reference depths for clay below sand
3570	Young's modulus at 1 % strain must be >= 30 MPa and <= 5.19615 MPa. Value entered = 60 MPa
3568	Longitudinal ULS calculation does not use Poulos and Bunce to calculate default alpha
3565	Randolph's Analysis does not use Poisson's ratio of 0.5 in undrained analysis
3560	Rename Workbook's Boundary Element and Boundary Increment tabs
3558	Ambiguity in Reference Manual regarding default values of earth and bearing pressure coefficients
3557	Add display of combination factors to Design Standard Property Inspector
3556	Remove unused values from RPX file regarding values of partial factors
3555	Move the axes indicator to the top left of the plan drawing
3554	Error "Results are not available for element at depth < -0.25 m" when displaying Shear stress graph
3553	Worksheet for combination of actions does not display any data
3552	Add column for Material Properties to Pile Group worksheet
3551	Pile Group Wizard does not rotate the pile cap with the piles
3549	Increase the number of piles that can be created by the Pile Group Wizard
3547	Add classification of combination of actions (e.g. quasi-permanent, transient, etc)
3538	Rename "Clean Up Program Data" command as "Delete Temporary Files"
3536	Top button in layer selection box is pointing in the wrong direction
3535	The Drawing Board should differentiate steel and concrete by colour
3533	Specify which stiffness is shown in the graph of borehole stiffness
3532	Error message "Invalid data in sheet '<Sheet/>', row 12" refers to the wrong row
3525	Increase the number of actions that can be entered via the ActionWizard to 50
3524	Example project 'Large pile group' does not include small strain stiffnesses needed for analysis
3523	RPX files for Tutorials 1-3 are corrupted in Release 6
3520	Cannot identify Es value in error message "The pile/soil stiffness ratio ... is less than 5 ... Es = 6.875 GPa ...)"
3519	An error occurred while reading data for clay (FineSoil.strength/UndrainedStrength.strength) in v2.5.6 RPX file
3518	Save boundary element results as <ProjectName>^<CalculationName>.ext instead of in folder { ProjectName }
3516	Workbook's Combination of Actions page does not show any data
3514	Improve wording of 'Reading data from ... XML node' messages created on opening RPX file
3513	Replace PGroupN executable with dynamic link library
3512	Young's modulus at 1 % strain must be >= 41.69 MPa and <= 26.3873 MPa. Value entered = 80.19 MPa
3510	Failed to install hardlock.cat signature
3509	Update Sentinel HASP/LDK Windows Command Line Run-time Installer to version 8.15
3508	Update Sentinel HASP/LDK Windows GUI Run-time Installer to version 8.15
3507	Template for importing actions that is installed in C:\Program Files (x86) is an out-of-date version
3506	User Manual gives wrong folder for import templates
3503	Provide maximum bending moment and shear force for each pile in the Boundary Elements worksheet
3502	Provide values for settlement in each layer in Randolph Analysis
3499	Cannot select a rock in the Drawing Board's borehole
3498	Demote "Radial influence factor (zeta) out of range" to warning in Randolph calculation
3497	Number of pile elements is calculated incorrectly when a combination of actions with Fz = 0 is applied
3496	Graph is cut off due to automatic scaling option not set for top axis
3495	Remove Temp folder from ProgramData\Geocentrix\Repute\2.5
3494	Rename UI.ini and MRU.ini configuration files
3492	Micropile details are missing from the Report
3491	Property Inspector will not accept Emax = 36.8MPa at 20.25 m with Emin = 5 MPa specified at 0.25 m
3488	Exported Excel spreadsheet names tab "Users <name> <location>"
3487	Water table line only extends over the left hand side of the Drawing Board
3485	Algorithm report does not include values of limiting skin friction and base pressure
3484	Add to Workbook the display of axial and largest (normal) shear force and bending moment
3482	Value of wall friction not given in Report
3481	Add key for symbols fslim, qblim, alpha, delta, and Ks in the Reporter
3479	Soil and rock data should appear before last page of report
3478	Boundary element shear stress graph should not display base pressure
3477	Message reports only 27 load increments have been read from Output.xml file
3475	Add support for variable pile stiffness
3405	Provide ability to model partially infilled pile
3378	Clarify that resultant forces and displacements in raked piles are given in local coordinates
3344	Change name of 'Standing Water' to 'Surface Water' in line with 2nd generation of Eurocode 7
3305	The ratio of the larger to smaller stiffness moduli must be >= 0 and <= 10. Value entered = 1001
3294	Windows Application Error when opening Quick-Start Tutorial from Tools tab
3258	Allow pile cap to be rotated on plan
3235	Allow stiffness values to be entered via Borehole Wizard
3206	Allows names to be specified in Action Wizard
3199	Add a Custom Rock item
3149	Bug in PGroupN code in CalcStiffnessDisplsStressesLoads.f90
3078	"'hr': Type mismatch" error on opening RPX file
3070	Allow soil and rock stiffness to be set in Borehole Wizard
3056	Distinguish between permanent/variable/accidental/seismic actions when drawing forces and moments
3043	Allow names to be specified for actions created by Action Wizard
3021	Show the inclination and orientation of forces and moments in the Property Inspector
2987	Add Program Option to clear old messages from Message Board on creating or opening a new project
2724	Allow actions to be classified as 'wind', 'ice', etc. as per Eurocodes
2343	Remove redundant properties from RandolphAnalaysis


Repute 2.5 release 9
--------------------
Version 2.5.9.20101
Released 16/10/2020

Issues fixed (42 items):
3469	Key to Fz vs depth graph does not display name of piles, only their 'index'
3468	tr1::bad_weak_ptr on changing value of soil stiffness
3467	Invalid characters in key for load vs displacement graph
3466	Buttons on Graph Paper tab are not labelled correctly when a borehole is selected in the Project Manager
3464	Error "Ground stiffness not specified" when changing type in Property Inspector
3463	Update reporting control to FastReport 6.7.9
3462	Invalid pile type (Pipe Pile) specified in Fleming's Analysis
3458	Cannot enter value for Pile cap breadth in y-direction
3457	Automatically generate a report on opening the Reporter
3450	Simplify and generalize custom design standards
3448	Section properties (such as A, EA, GJ etc) are missing from micropile Property Inspector
3440	Partial factors are not applied to boundary element analysis when using custom design standard
3439	Move report template from Program Files to to ProgramData folder
3438	Reporter tab does not get focus when Reporter is opened
3436	Rock pressure coefficient k5 incorrectly labelled "kr" in Property Inspector
3434	Add colour-coding to messages in the Message Board
3433	Provide facility to turn sounds on or off
3432	Message Board displays "bad lexical cast: source type value could not be interpreted as target" at program startup
3431	Partial factors for BS EN 1997-1 and BS 8004:2015 are those for EN 1997-1
3423	Enable renewal of licence from the Internet
3422	Moments and forces are not imported into Repute
3420	Maximum cube strength for custom concrete should be greater than 60 MPa
3418	Update cURL library to v7.71.1
3417	Update zlib1 compression library to v2.2.11.0
3415	Error "BaseResistanceFactorSetR4" on saving project with NTC08 design standard
3414	Error finding prototype from Id = 'Bored pile'
3413	Invalid data in sheet '<Sheet/>', row 3: Pile length must be >= 2 m and <= 126.1 m. Value entered = 0 m
3412	Project Manager should remove headings with nothing underneath them
3411	Error searching for expression: 'FineSoil.strength/UndrainedStrength.base_strength' in file created in v2.5.6
3410	Update drag/drop control to Raize DropMaster 2.5.1
3409	Update Sentinel HASP library to version 8.11
3408	Update graphing control to FastReports v6.7.9
3407	Update Steema TeeChart to v9.30.200525 (i.e. 2020.30)
3406	Update Developer Express controls VCL to v20.1.3
3403	On closing project, get error message "boost::filesystem::copy_file: The system cannot find the file specified"
3385	Rock materials do not show on the ‘Review’ tab
3317	Cannot create file "... infilled pipe pile.rpx". The request is not supported
3302	Add sub-headings to Project Manager tree control
3277	Print icon within the Reporter tab does not create any output
3270	Data import takes a long time with many (> 200) piles
3256	Error on importing spreadsheet "Could not convert variant of type (UnicodeString) into type (Double)"
3190	Log file is produced by release version of PGroupN
2801	tr1::bad_weak_ptr when classifying newly created Clay as 'saCl'
962		Improve the aural feedback for warnings and errors, etc


Repute 2.5 release 8
--------------------
Version 2.5.8.20071
Released 29/07/2020

Issues fixed (37 items):
3404	A 'ping' sound is emitted by the computer whenever a warning message is generated
3393	Shear stress utliization should be presented as an absolute (i.e. non-negative) value
3386	Error on program start: There is no Geocentrix network licence key at address 'ass_id ="0" tracking_level (etc)
3377	Caption should indicate whether program is logged in or not
3376	Network licence has suddenly stopped working
3375	There is no Geocentrix licence key at address ...
3373	Horizontal Young's modulus of soil does not change on changing anisotropy
3372	Exported 'Boundary Elements' spreadsheet is corrupted on opening in Excel
3371	Provide better explanation of Sentinel error message 27 - "Program running on a terminal server"
3370	Fleming Analysis's shrinkage algorithm is lost on saving RPX file
3369	Boundary Element Analysis's plugging algorithm is lost on re-opening RPX file
3368	Cannot set alpha algorithm for soils in Longitudinal ULS Property Inspector
3367	Algorithms should appear under the same Property Inspector heading for all calculations
3366	Example Randolph calculation does not reproduce book example
3365	Provide a more appropriate name for the Shrinkage algorithm
3364	Cannot change the value of G/E @ zmax in the soil's Property Inspector
3363	Uniform surcharge does not have any influence on boundary element results
3362	Surcharge is missing on re-opening project (RPX) file
3361	Show commands for C2V and V2C files only when enabled in Program Options
3360	Randolph Analaysis with two layers gives settlement twice that with one layer
3359	Discrepancy in calculation of elastic shortening via Fleming's Analysis
3358	Program miscalculates the value of g in Fleming's analysis
3355	Error on re-opening exported Excel spreadsheet containing data evaluating as 'INF'
3354	Error on saving modified file: "boost::filesystem::copy_file: The system cannot find the file specified"
3353	Access violation on changing name of item in Property Inspector
3352	Access violation on changing Ground Stiffness to 'Constant stiffness'
3342	Splash screen remains hidden instead of closing after startup
3341	Error message "Session been interrupted (Status = 39)" does not reset commands on Licence tab
3339	Repute2.lic should not be saved to disk if no changes are made to it
3338	Licence backup files are misnamed as " - Copy (2).lic" etc
3337	Partial factors for BS EN 1997-1:2004+A1:2013 are not the same as 2014 UK National Annex for accidental design situation
3336	Program is out of memory after 15 minutes if licence uses MAC address
3314	Better explanation needed for "Input error: double raked piles under torque need same absolure X and Y rakes"
3310	Program does not display its login status on the application's title bar
3210	sqrt: DOMAIN error when adding uniform surcharge to combination of actions
3181	Unable to run Repute Trial Edition
3124	Licence acquisition times out when network has poor connectivity


Repute 2.5 release 7
--------------------
Version 2.5.7.20021
Released 19/02/2020

Issues fixed (20 items):
3334	MRU list is not updated on exiting the program
3333	RPX files provided for Tutorials 1 and 2 are not well-formed
3331	Update graph control to Steema TeeChart VCL32 v2020.29
3330	Update reporting control to FastReport v6.5.1
3329	Update user interface controls to Developer Express VCL v19.2.4
3328	Hyperbolic boundary element analysis sets incorrect wall friction value when no algorithm is specified
3324	Access violation when importing pile group data via Wizard
3323	Program does not ship with revised template needed for import into version 2.5 release 6
3322	Pile-soil interface friction passed to PGN file is 1 deg
3321	An error occurred while reading data for 'Clay': 2541
3320	An error occurred while reading data from v2.5.3 RPX file for 'Clay' when undrained strength increases with depth
3318	Cannot enter unconfined compressive strength less than 5 MPa for rock unless Strict Validation flag is turned off
3316	Cannot deselect infill material from Pipe Pile
3315	Rock no longer appears in dropdown list of soil/rock types in Borehole Wizard
3309	Failed to install hardlock.cat signature
3308	Longitudinal ULS calculation ignores skin friction and end bearing of rock layers
3307	Property Inspector for Longitudinal ULS calculation does not allow rock friction or rock bearing algorithms to be specified
3306	Image overlaps progress bar and buttons in Repute Setup
3232	Warning 'tr1::bad_weak_ptr' on changing unconfined strength of rock
3201	boost::weak_ptr on changing density of clay (Training Course workshop)


Repute 2.5 release 6
--------------------
Version 2.5.6.19092
Released 20/12/2019

Issues fixed (35 items):
3301	Unexpected error message "Some items extend beyond the drawing..."
3298	Improve clarity of error message "Too many concurrent users"
3297	Ultimate axial capacity of pile exceeded by tension pile in rock
3296	Different results obtained from v2.5 Release 5 compared with Releases 2 and 4
3295	Cannot find HASPUserSetup.exe
3293	Convert stiffness from old RPX files to new format
3291	Amplification factor for combination of action is not set on opening project file
3290	Simplify entry of small strain and large strain stiffnesses
3287	Input error: bearing capacity factors Nq flag is not 1 or 2
3286	Intel(r) Visual Fortran run-time error
3284	Add support for pipe pile with concrete infill
3283	Add compiler name and version to About box's technical information
3282	Relocate temporary PGroupN files in Windows TEMP folder
3281	Atmospheric pressure for rock algorithms set incorrectly on opening RPX file
3280	Ultimate capacity of pile group exceeded when pile is founded in rock but not in weak deposits
3279	In boundary element analyses, rock is treated as soil, unless it is placed in a Rock Layer
3278	Same results are obtained after changing loads without saving and re-opening RPX file
3275	Sorting items does not mark project as needing to be saved
3274	Intel Visual Fortran run-time error when running BEA with infinite bearing pressure limit
3271	Cannot find Sentinel LDK/HASP Runtime setup program 'C:/Program Files (x86)/Geocentrix/HASPUserSetup.exe'
3269	Workbook does not allow Notes to be displayed on its Combination of Action page
3268	Add ability to update pile properties via Pile Group Import Wizard
3266	Allow forces and moments to be specified in single row in load import spreadsheet
3265	Import Loads Wizard should ignore forces and moments that have zero magnitude
3264	Add ability to show grid lines on plan
3262	Curl error 7: Failed to connect to host or proxy
3259	Display the total number of piles in the pile group in its Property Inspector
3252	Program automatically generates many algorithms for each boundary element analysis
3251	Abnormal program termination when importing pile group specifying 'Augered' pile type
3250	BEM analysis uses large-strain Es after switching stress-strain model from bi-linear to hyperbolic
3249	Error reading non-linear layer when running boundary element analysis with earth pressure algorithm
3248	Error reading non-linear layer
3246	Build number always written as '1' in RPX file's <Repute> tag
3229	Changes to the parameters of FlemingAnalysis do not clear old results
2800	Ruler shows ground level at -8.5m for pile group with raked piles with upstand


Repute 2.5 release 5
--------------------
Version 2.5.5.19080
Released 07/08/2019

Issues fixed (44 items):
3244	Algorithms do not need to be created when opening legacy linear-elastic Boundary Element Analysis
3243	Base diameter of bored pile is set to default value (600 mm) when imported via Wizard if shaft diameter is smaller
3241	Borehole is drawn above ground level when an upstand pile and standing water are present
3239	Provide function to remove duplicate items from a project file
3236	Allow depth of each action to be specified in the Action Wizard
3234	Move obscure/legacy Boundary Element Analysis options to 'Advanced Options' group
3233	'Not specified' error in Drawing Board when Pipe Pile or Spun Pile has no section specified
3231	Micropiles specified with diameter 300 mm are lost on re-opening RPX file
3230	Provide algorithms for shaft friction and end bearing in rock
3228	Borehole does not refresh automatically when selecting a new layer in the Layer Selection box
3227	By default, hide the effective cohesion column from Workbook display for Longitudinal ULS calculation
3225	Duplicate command appends '- Copy' to previously duplicated items instead of '- Copy (n)'
3224	Internal error: no XML reader has been registed for 'RockFrictionAlgorithm'
3221	Error in calculation of elastic section modulus for minor axis
3220	Minor improvements to Bearing Pile Property Inspector
3219	Automatically write error messages to the program's log
3216	Allow interface adhesion value in Boundary Element Analysis to be specified via algorithm
3215	Revise the alpha algorithm to include the Kolk and van der Velde (1996) method
3214	Cannot increase diameter of Custom Pipe Section from default value
3209	Input error: invalid delta specified for drained soil layer
3208	Revise maximum skin friction limit to match CIRIA C574 value for chalk
3205	Workbook display of borehole properties has gone awry
3203	Cannot enter custom value directly into Bearing Capacity Factor algorithm Property Inspector
3197	Pile Group Wizard is disabled in Trial Edition (but is needed for Tutorial 4)
3193	Include the program's build number in the RPX file
3188	Display licence number from RPX file when opening that file
3186	Vertical displacement is reported incorrectly in Reporter
3182	Change items available in Trial Edition via Stockyard
3181	Unable to run Repute Trial Edition
3180	Network settings are not preserved when importing new licence (.LIC) file
3175	Cannot specify custom spun pile section with diameter > 600 mm
3174	Load on single pile ignores combination of actions (just considers self-weight)
3173	Boundary element analysis includes applied forces twice when a design standard is linked to it
3172	Add warning message to inform the user if they are not running the latest release
3171	Add current release to message stating "The latest release of this program is ..."
3170	Piglet XLS conversion wizard cannot read spreadsheet with additional page inserted at beginning
3169	Error message "Can only convert Piglet v5.1 files. File versions in -NAN"
3104	Prevent user from entering Fx = Fy = Fz = 0 into Action Wizard
3081	Allow skin friction and end-bearing values in Boundary Element Analysis to be specified via algorithms
3032	Cannot switch Berezantsev bearing capacity algorithm to Custom option just by typing custom value
2983	Provide "Yes to All/No to All" options when deleting multiple items in the Project Manager
2924	Provide algorithms to support Poulos's equations for calcuating pile capacity in rock
2905	Cannot perform ULS verification on pile group containing one pile
2499	Provide section properties for European wide flange beams


Repute 2.5 release 4
--------------------
Version 2.5.4.18100
Released 21/11/2018

Issues fixed (48 items):
3167	Spurious values given for minimum and maximum pile rotation in Reporter
3166	Wrong font displayed in the Reference Manual
3163	Program does not show welcome screen on startup
3162	Reporter does not display value of dG/dz for soils
3161	Extend action import capability to include variability
3160	Allow server IP address to be specified using hostname
3159	Make Tutorials available for download from the Geocentrix website
3158	Spreadsheet exported from boundary elements worksheet has very large footer rows
3151	Allow bored pile diameters greater than 3000 mm to be entered
3150	Changing the stiffness of a duplicated soil also change the stiffness of the soil it duplicates
3147	Add support for the latest range of ICP spun piles
3146	Borehole is not drawn at correct elevation
3145	A 'ghost' (white) tubular pile appears at the plan centre of the pile group
3143	Improve feedback when boost::filesystem::create_directory error occurs
3142	Provide better error handling when saved boundary element results are corrupted
3141	Piles lengths do not change in Workbook according to instructions given in User Manual pp35-36
3136	Graph does not display results after building the current scenario
3135	Allow multiple items to be deleted by answering 'Yes to All' in dialog box
3134	Access violation on deleting two or more scenarios or calculations from the Project Manager
3130	An error occurred while reading data for 'StockPipeSection': Outside diameter must be >= 333.333 mm and <= 3657.6 mm. Value entered = 219.1 mm
3129	Add support for saving Workbook results in Excel's XLSX format
3128	Display Release number in splash screen
3127	Error 1606. Could not access network location ?y?yS_VERSION_INFO\Repute Projects
3126	Error on opening Repute 1.x file: "Number of pile elements must be >= 3 and <= 3. Value entered = 10"
3125	Unable to change the pile cap thickness
3123	Design base resistance (Rbd) does not account for the calculation's bearing pressure limit
3118	Top of borehole is drawn at 6 m above ground level
3117	Change the name of the boundary element analysis "linear-elastic/perfectly-plastic" model to "bi-linear"
3116	Change the default stress-strain model for the boundary element analysis to bi-linear
3115	Access violation when opening RPX file by double-clicking on it in Windows' File Manager
3114	Access violation when validating boundary element analysis in which pile/soil stiffness ratio is less than 5
3112	Access violation when running a boundary element analysis that generates an error during validation
3109	Splash screen does not appear on program startup
3108	Access Violation on validating undrained calculation using Chalk
3107	Invalid default value in Pile Group Wizard
3106	Text is out of date in Quick Start Guide, Tutorial 6 Step 2, bullet 10
3105	Clarify in the Quick-start Guide the need to click on Pile Group 1 in order to view its properties in the Property Inspector
3102	Rulers are not drawn properly on program startup
3100	Automatically create backup of existing licence when importing/editing licence
3099	Create backup of existing licence when changing licence details
3083	Allow network licence to be specified using hostname instead of IP address
3073	Improve error message when Hyperbolic BEM cannot find small strain stiffness
3008	Program opens files via File Manager without valid licence being present
2938	Allow the plan location of forces/moments to be tied to the locations of the piles
1713	Add single-pile design capabilities for tubular piles
1365	Add plots of tip resistance and shaft friction vs vertical displacement
792 	Allow multiple load paths to be applied one after the other (rather than a single load path being applied)
760 	Show maximum bending moments & forces along piles in "Key Results" report


Repute 2.5 release 3
--------------------
Version 2.5.3.18031
Released 07/06/2018

Issues fixed (40 items):

3097	Access violation in module Scenarios.dll when deleting concrete from Project Manager
3093	Option 'Generate C2V file for HASP key' is not available from Sentinel Admin Control Centre
3092	Error searching for expression: 'AnnularSection.wall_thickness'
3091	Repute 2.5 Release 2 runs slowly across large Wide Area Networks
3089	Allow Repute setup program to run silently without prompting to install the Gemalto Sentinel drivers
3088	Plastic section modulus of pipe section is incorrect
3087	Boundary element analysis fails with message 'Error reading flags'
3085	Default weight density and angle of shearing resistance in Borehole Wizard do not match screenshot in Quick-Start Tutorial
3076	Increase minimum cover for pile cap to 50 mm and default to 150 mm
3074	Import Loads Wizard does not import the names of moments
3071	Action Wizard crashes after entering Force = (0, 0, 0) in Step 2
3069	Rotate commands perform apparently random rotations on pile group
3068	Add columns to Workbook to display pile base and shaft areas (in addition to equivalent diameters)
3067	Formula for Fleming's Analysis in Reference Manual is in error
3066	Add ability to save user interface changes from one session to the next
3065	Allow different plan shapes of pile cap (triangular/hexagonal/circular) to be specified
3064	Automatically increase/decrease scale on switching to/from Plan view
3063	Enhance 'Retrieve data from key' command to include ReAssurance details
3062	Error 'Not specified' when generating report containing a non-Custom alpha algorithm
3061	Increase the limit on pile length from 70 m to 126.1 m
3060	Longitudinal ULS Property Inspector allows beta algorithm to be selected at same time as Ks and delta algorithms
3059	Add support for LDSA Guidance Notes for ... Bored Piles in London Clay
3050	Split 'Links' group into 'Links' and 'Algorithms'
3048	List index out of bounds when changing Free-Standing Length of several piles in Workbook
3046	Pile orientation does not match the orientation of the pile group when created in the Pile Group Wizard
3042	Drawing Board does not display H-piles with proper orientation
3035	'Permanent' group is collapse on opening Property Inspector for Combination of Actions
3034	Change units for rock unconfined compressive strength to MPa in Borehole Wizard Step 4
3033	Item in Stockyard can be dragged into Project Manager even when disabled (applies to Trial edition)
3031	Cannot deselect limiting skin friction or end bearing algorithms
3028	Arrow depicting uniform surcharge is drawn too large
3019	Caption for Step 3. Enter the pile length and upstand should read 'Step 4'
3017	Warning message 'Using default value for alpha' appears multiple times in the Message Board
3016	Program is disabled when Trial Edition is selected
3013	Repute is slow or does not respond after running non-linear BEM analysis for pile group
3012	Reporter displays incorrect information
3009	Rock is always treated as drained soil in ULS verification
3007	Error occurred reading expression: 'CustomEN1997.factor_on_shearing_resistance' in RPX file from 2.0.22
2963	Display HASP API version in About Box credits screen
2935	The installer has insufficient privileges to modify this file: C:\ProgramData\Geocentrix\Repute2.log


Repute 2.5 release 2
--------------------
Version 2.5.2.17138
Released 20/12/2017

Issues fixed (41 items):

3001	Maximum length of spun pile (= 18 m) is too limiting for practical use
2998	Unable to display the Reporter - error 'Not specified'
2997	Arrow head for moment points in wrong direction in combination of actions
2996	Program crashes with message "Assertion failed: intf != 0, file ... utilcls.h, line 2298" when running large BEA
2995	Error "bad lexical cast: source type value could not be interpreted as target" when opening RPX file created in v2.0.6
2994	"Error finding prototype from id = '<ID/>'" occurs when creating Square, Spun, Micro, and Pipe piles via Pile Group Wizard
2993	Program fails to install via SCCM using SYSTEM account
2992	Avast Antivirus blocks communication between Repute and the Sentinel Licence Manager
2991	Could not connect to licence key attached to this computer, (status =42: Sentinel license manager version too old)
2990	Could not connect to a network licence key at address 10.160.5.82 (Status = 31: Requested Feature not available)
2989	Workbook's drop-down selection box does not update when calculation's name changes
2988	Default name for rock should be 'Rock 1' not 'Soil 1'
2981	Boundary Element Report does not display limiting skin friction or end bearing values
2980	Soil report does not display fcv, Eu, or Eu,max
2979	Beta value is calculated incorrectly when Option is set to Rollins et al. (for gravel)
2978	Randolph analysis does not abort when soil stiffness values are missing
2977	Cannot change the properties of a Custom Spun Pile Section (or a Custom Pipe Section)
2976	Run button should be hidden in release build of PGroupN
2973	Add note in Reference Manual that the self-weight of the pile cap is added to the loads on a pile group
2972	Error allocating memory for matrix
2971	In the Action Report, the resultant force and moment are displayed in engineering format and overflow the space allocated to them
2970	PGroupN's console window displays ** in time countdown
2969	Soil properties should report undrained stiffness as well as drained (if appropriate)
2967	Stockyard incorrectly displays panels for items that are not available
2966	The Sentinel Runtime Environment is not installed
2965	Error searching for expression: 'CustomEN1997.factor_on_shearing'
2964	Assertion failed (intf != 0 in file utilcls.h, line 2298) when dropping item from one instance of Repute to another
2958	Layer's wall friction drop-down box displays the wrong algorithms
2957	Boundary element report does not display pile cap results for linear-elastic analysis
2956	Cannot enter depth > 0 m for Standing Water Table
2955	PGroupN's title bar incorrectly states version as 2.17.5 instead of 2.17.6
2954	No error message generated when pile spacing < 1.5 D
2951	An error occurred while reading data for 'OrdnanceDatum': Error searching for expression: 'OrdnanceDatum.x_datum'
2950	An error occurred while reading data for 'Stage': The name 'Preliminary Pile Test' is already being used. Please choose a different name
2949	Force entry of IP address in correct format (xxx.xxx.x.xxx)
2946	Use Registry setting to detect presence of Sentinel drivers
2942	Output.xml does not report input values for rock k1-k5
2879	Units for extents are not written to config file (Repute2.cfg)
2623	Allow different X- and Y- spacings to be specified in the Pile Group Wizard
2332	Provide support for pre-stressed concrete spun piles with annular hole
2226	Provide summary table showing maximum values of structural effects for each pile


Repute 2.5 release 1
--------------------
Version 2.5.1.17100
Released 18/08/2017

Issues fixed (5 items):

2945	Incorrect message displayed when ReAssurance has expired
2943	Reporter page of Program Options box is redundant
2910	Contents of User Manual should be revised for version 2.5
2876	Pure virtual function called when changing properties of Boundary Element Analysis
2797	Failed to load data from XML file: <Displacement axis="X" value="**" units="m"/>


Repute 2.5 Release Candidate 3 (build 17087)
--------------------------------------------
Version 2.5.0.17087
Released 15/08/2017

Issues fixed (7 items):

2941	Young's modulus of class C25 to C60 concretes is too low
2940	Load applied to pile group is ignored if it is not included in a Combination of Actions
2939	Layers are not listed in top-to-bottom order in Borehole's Select layers box (listed alphabetically instead)
2937	Sign of pile head rotation is displayed inconsistently
2936	No results are produced when running boundary element analysis
2932	X-rake appears in exponential format in Reporter
2701	Raise limit on concrete strength and stiffness to accomodate spun piles


Repute 2.5 Release Candidate 2 (build 17085)
--------------------------------------------
Version 2.5.0.17085
Released 09/08/2017

Issues fixed (16 items):

2934	Rakes are passed incorrectly to PGroupN via PGN file
2933	Rotation is displayed in different units in Reporter than elsewhere in the program
2931	Resultant moment does not display a sign in Property Inspector or Reporter
2930	Incorrect/missing data in Reporter
2929	bad_weak_ptr on entering small strain stiffness for clay soil
2928	Error message "boost::filesystem::create_directory" on running boundary element analysis
2926	Program crashes on creating pile group in Pile Group Wizard
2925	Program crashes on creating pile group containing a single pile in Pile Group Wizard
2923	Calculate pile lateral capacity in rock using expressions equivalent to those in BS 8004:2015
2920	Provide instructions for silent installation of Repute
2917	Actions are missing from report
2915	Pure virtual function called when changing soil/interface friction ratio
2844	Increase the limiting value of frictional resistance for piles in rocks above 200 kPa
2809	Allow boundary element analysis to perform ULS calculation with partial factors from design standard
2735	Store (x,y) co-ordinates of site datum
1465	A change to Poisson's ratio causes a change in E (but should change G)


Repute 2.5 Release Candidate 1 (build 17080)
--------------------------------------------
Version 2.5.0.17080
Released 03/08/2017

Issues fixed (25 items):

2922	Revise use of term 'rigid layer' now that support for rock has been added to the program
2921	Increase bearing pressure limit in algorithm to allow for piles bearing on rock
2918	Results for pile cap (settlement, force, moment, rotation) are missing from the Reporter
2916	Results differ between Windows and DOS version of PGroupN
2914	Assertion failed: intf != 0, file ..\utilcls.h, line 2298
2913	Input error: Layer type flag is not 1, 2, 3, or 4
2912	Contents of Quick-Start Guide should be revised for version 2.5
2911	Contents of Reference Manual should be revised for version 2.5
2909	Reporter shows unnecessary data for boundary element analysis
2908	Rock factors k1-k4 are missing from the Reporter
2907	Skin friction and bearing pressure limits are missing from the Reporter
2906	Information is missing from Reporter
2903	Program crashes when number of load increments is increased to 200 in BEM analysis
2901	Soil report does not record values of Young's modulus
2896	Disable non-linear options that are not used in boundary element analysis
2895	Program crashes on changing boundary element Stress-Strain Model to Hyperbolic
2894	Program crashes on changing Save Results flag
2893	Program crashes on re-opening project file
2892	Program crashes on changing rock layer to drained
2891	Change 'Is drained?' flag to 'Drained/Undrained'
2889	Default values of rock properties in Borehole Wizard are out of range in Property Inspector
2887	Cannot deselect 'Has Casing' flag for bored pile
2886	Mean elastic modulus for concrete should be displayed in GPa not MPa
2853	A pile with X-rake = 30 deg and Y-rake = -30 deg is incorrectly detected as an asymmetrically raked pile
2852	Cannot link Beta Algorithm to Soil Layer


Repute 2.5 Beta 3 (build 17073)
-------------------------------
Version 2.5.0.17073
Released 25/07/2017

Issues fixed (6 items):

2904	Increase default number of load increments in boundary element analysis to 200
2902	PGroupN engine does not use multi processor FORTRAN libraries
2900	Default value of rock k3 parameter is outside the allowable range
2898	Skin friction limit for second layer is ignored in multi-layer soil profile
2897	Reinstate ability to set global limits on skin friction and end bearing
2888	PGroupN calculation window shows strange values (è,h')


Repute 2.5 Beta 2 (build 17054)
-------------------------------
Version 2.5.0.17054
Released 23/06/2017

Issues fixed (11 items):

2880	Revise default layer averaging option (Poulos vs Yamashita) depending on the design situation
2878	Generated PGN file has strange values for phi/delta angles of Soil 2=sand
2877	PGN file includes an alpha value for rock, which is not needed
2876	Pure virtual function called when changing properties of Boundary Element Analysis
2875	Boundary Element Analysis displays wrong message when unable to generate PGN data for rock
2874	Program crashes changing BEA stress-strain model to hyperbolic when drainage condition is drained
2873	Problems caused by rock angle of shearing resistance of 30 degrees
2872	Borehole Wizard does not cater for invalid rock weight density
2871	Borehole Wizard does not provide facility to enter UCS for rock
2870	Borehole Wizard has not assigned rock to Layer 3
2869	Project Wizard is unable to navigate outside the Documents folder 


Repute 2.5 Beta 1 (build 17053)
-------------------------------
Version 2.5.0.17053
Released 01/06/2017

Issues fixed (41 items):

2838	Project Manager should differentiate between calculations by using different icons
2835	Disregard specified design standard in Boundary Element Analysis created in Repute v2.0 and earlier
2834	"User options not found" appears as a Warning Message at program startup
2833	Messages should be sorted by date not time
2831	Message Board does not display duplicate messages even when generated some time apart
2830	Text is not visible on title bar on program startup on Windows 10
2829	Change default Boundary Element Analysis model to Linear Elastic
2825	Hide R factors for linear-elastic/perfectly-plastic model in Boundary Element Analysis Property Inspector
2817	Increase the available pile types in the Pile Group Wizard
2813	XML Project File does not display on Windows 10 ("Access is denied")
2811	Section is not copied when H-pile is duplicated
2808	Display name of design standard used in Longitudinal ULS calculation
2807	Cannot enter Ks value of 0.4 for normally consolidated soil
2799	Version number passed via PGN file is wrong
2796	Confusing error message on opening project: Unconfined strength of rock ... has been reset to 30 MPa (was previously 30 MPa)
2795	Program won't accept angle of shearing resistance (35 deg) within rock range (30-38 deg)
2794	Provide realistic limits to possible lengths and diameters of CFA piles
2793	Invalid cylinder strength is read on opening RPX file containing concrete with no cylinder strength specified
2784	Improve speed of program by linking with Intel's Maths Kernel Library (MKL)
2772	Promote non-linear options one level in Property Inspector for Boundary Element Analysis
2770	Stockyard shows redundant 'PipeSection' item under Pipes
2753	Check length specified for Spun Piles is possible
2737	Add C60 concrete grade
2729	Add scaling factor to combination of actions to allow < 100% of loads to be applied
2680	Relax the upper limit on dG/dz for lightly cemented sands
2673	Details of certain algorithms are missing from the Reference Manual
2603	Add square precast concrete driven piles to Pile Group Wizard
2537	Provide option to control expansion of tree view when Property Inspector is first displayed
2536	Add further pages to Program Options box, User Interface section
2487	Remove dependency on Aladdin HASP License Manager
2371	No units for Section/Diameter on second page of Pile Group Wizard
2125	Tubular piles are not available for selection in the Pile Group Wizard
2114	Provide ability to specify pile (x, y) co-ordinates by importing data from a spreadsheet
1999	Allow user to select which sections and materials appear in the Stockyard via a page in Program Options
1685	Browser page in Program Options box is redundant
1684	Units, Reports and XML pages in the Program Options box need amending
1439	Add driven concrete piles to the options available in the Pile Group Wizard
1434	Allow 'rounded' pile diameters to be entered via Pile Group Wizard
1372	Should not need to press ENTER to change check boxes settings in the Property Inspector
1326	Error loading XML document 'Output.xml' owing to ampersand '&' in Boundary Element Analysis name
1135	Project > Reset Datum does not automatically force refresh of Drawing Board
 
 
Program files in the latest build
---------------------------------
> indicates file has changed from the previous version

***Geocentrix executables***
> Repute2.exe (2.5.10)

***Geocentrix dynamic link libraries***
> Actions.dll (1.21.1)
> Algorithms.dll (1.21.1)
> BearingCoefficients.dll (1.21.1)
> Boreholes.dll (3.21.1)
> EarthCoefficients.dll (3.21.1)
> Engineering.dll (4.21.1)
> Geocentrix.dll (4.21.1)
> Interfaces.dll (3.21.1)
> Materials.dll (4.21.1)
> Piles.dll (2.21.1)
> Platform.dll (4.21.1)
> Project.dll (4.21.1)
> Reports.dll (1.21.1)
> Repute.dll (2.21.1)
> Repute1.dll (2.21.1)
> RexML.dll (1.21.1)
> RexUI.dll (1.21.1)
> Scenarios.dll (1.21.1)
> Sections.dll (1.21.1)
> Soils.dll (4.21.1)
> Standards.dll (3.21.1)
> Surcharges.dll (3.21.1)
> Surfaces.dll (3.21.1)
> WaterTables.dll (4.21.1)

***Boost dynamic link libraries*** (dated 07/11/2017)
 boost_date_time-bcb32c-mt-1_55.dll
 boost_filesystem-bcb32c-mt-1_55.dll
 boost_serialization-bcb32c-mt-1_55.dll
 boost_system-bcb32c-mt-1_55.dll
 boost_thread-bcb32c-mt-1_55.dll

***CodeGear dynamic link libraries***
 borlndmm.dll (25.0.29899.2631)
 cc32250mt.dll (1.144.0.0)

***CodeGear packages*** (dated 09/03/2018)
 bcbie250.bpl
 dbrtl250.bpl
 rtl250.bpl
 vcl250.bpl
 vcldb250.bpl
 vclimg250.bpl
 vclx250.bpl

***Curl libraries***
 libcrypto-1_1.dll (1.1.1.7)
 libcurl.dll (7.71.1.0)
 libssl-1_1.dll (1.1.1.7)
 zlib1.dll (2.2.11.0)

***Developer Express packages*** (20.1.3)
 cxExportRS25.bpl
 cxGridRS25.bpl
 cxLibraryRS25.bpl
 cxPageControldxBarPopupMenuRS25.bpl
 cxTreeListRS25.bpl
 cxVerticalGridRS25.bpl
 dxBarExtItemsRS25.bpl
 dxBarRS25.bpl
 dxComnRS25.bpl
 dxCoreRS25.bpl
 dxDockingRS25.bpl
 dxGDIPlusRS25.bpl
 dxNavBarRS25.bpl
 dxPSCoreRS25.bpl
 dxPScxCommonRS25.bpl
 dxPScxExtCommonRS25.bpl
 dxPScxGridLnkRS25.bpl
 dxPScxPCProdRS25.bpl
 dxPScxTLLnkRS25.bpl
 dxPScxVGridLnkRS25.bpl
 dxPSdxLCLnkRS25.bpl
 dxPSdxSpreadSheetRS25.bpl
 dxPSLnksRS25.bpl
 dxPSPrVwAdvRS25.bpl
 dxPSPrVwRibbonRS25.bpl 
 dxPSTeeChartRS25.bpl 
 dxRibbonRS25.bpl
 dxRibbonCustomizationFormRS25.bpl
 dxServerModeRS25.bpl 
 dxSkinOffice2007BlackRS25.bpl
 dxSkinOffice2007BlueRS25.bpl
 dxSkinOffice2007GreenRS25.bpl
 dxSkinOffice2007SilverRS25.bpl
 dxSkinsCoreRS25.bpl 
 dxSpreadSheetRS25.bpl
 dxSpreadSheetCoreRS25.bpl

***FastReport packages*** (6.7.9)
 frx25.bpl
 fs25.bpl

***Intel libraries***
> libmmd.dll (20.0.0.0)
> libifcoremd.dll (20.0.1.0)
> libiomp5md.dll (20.0.1.0)
> mkl_avx2.dll (2020.0.4.1)
> mkl_core.dll (2020.0.4.1)
> mkl_intel_thread.dll (2020.0.4.1)
> svml_dispmd.dll (20.0.0.0)

***MJ Freelancing packages*** (dated 10/02/2020)
 MJFClangC25.bpl (1.0.0.16120)

***OCXs***
 hhctrl.ocx (5.2.3790.4110)

***Raize Software packages*** (dated 27/05/2020)
 DropMasterVcl250.bpl (2.5.1)

***Sentinel dynamic link libraries***
 hasp_windows_48297.dll (8.11.42174.60000)
 sntl_adminapi_windows.dll (8.0.39819.60000)
 sntl_licgen_windows.dll (8.0.42880.60000)
 
***Steema TeeChart packages*** (dated 25/05/2020)
 Tee925.bpl (9.30.200525)
 TeePro925.bpl (9.30.200525)
 TeeUI925.bpl (9.30.200525)
 TeeUser9.hlp (07/06/2007)

***other files***
 Repute2.exe.manifest (10/02/2006)

Help\
  Repute2.chm (22/09/2009)

Manuals\
  Repute 2 Quick-Start Guide.pdf (16/10/2020)
>  Repute 2 Reference Manual.pdf (25/03/2021)
>  Repute 2 User Manual.pdf (25/03/2021)

Materials\
  Concretes\ (all 15/08/2017)
    BS 8110\ 
      C25.xml 
      C30.xml 
      C35.xml 
      C40.xml 
      C45.xml 
      C50.xml 
      C60.xml
      C80.xml
      C90.xml
    EN 206\ (all 22/06/2010, except where noted)
      C8-10.xml (15/08/2017)
      C12-15.xml
      C16-20.xml
      C20-25.xml
      C25-30.xml
      C30-37.xml
      C35-45.xml
      C40-50.xml
      C45-55.xml
      C50-60.xml
      C55-67.xml (08/12/2017)
      C60-75.xml (08/12/2017)
      C70-85.xml (08/12/2017)
      C80-95.xml (08/12/2017)
      C90-105.xml (08/12/2017)
      C100-115.xml (08/12/2017)

  Steels\   (all 27/09/2016)
    BS 4360 Specification for weldable structural steels\
      43.xml 
      50.xml
      55.xml

    Corus\
      Advance 275.xml
      Advance 355.xml

    EN 10025 Hot-rolled products of structural steel\
      Legacy\
        Fe360.xml
        Fe430.xml
        Fe510.xml
      E295.xml
      E335.xml
      E360.xml
      S185.xml
      S235.xml
      S275.xml
      S355.xml
      S450.xml

    EN 10248 Hot-rolled sheet piling of non allo steels\
      S240GP.xml
      S270GP.xml
      S320GP.xml
      S355GP.xml
      S390GP.xml
      S430GP.xml

Release Notes\
> Readme.rtf (27/04/2021)
> Repute2.5.10.txt (27/04/2021)

Reports\
  ReportMaster.fr3 (2.5.9, dated 03/09/2020)
  Report.html (31/07/2006)
  Report.xml (31/07/2006)
  Repute2.fr3 (2.5.9, dated 03/09/2020)

  Generated\
    readme.txt (29/06/06)

  HTML\
    (Include).xslt (all 30/07/2006, except *)
    Actions.xslt
    Algorithms.xslt
    All Items.xslt
    Calculations.xslt
    Design Standards.xslt
    Geometrical Objects.xslt
    Geotechnical Constituents.xslt
    Materials.xslt
    Project Information.xslt
    ReportNotAvailable.html* 27/06/2003
    Scenarios.xslt
    Sections.xslt
    Structural Elements.xslt

  Icons\
    (various)

  PGroupN\
    PGroupN-Input.xslt

  Stylesheets\
    Repute.css

  SVG\
    SVG.xslt

  Welcome\
    Geocentrix.gif (10/05/2005)
    Geomarc.gif (28/11/2006)
    Repute.css (11/01/2017)
    Repute.gif (13/05/2005)
    Repute.html (26/05/2017)

  WordML\
    (various)
    
Sections\
  Bearing Piles\
    ArcelorMittal\
      HP\
	    HP ### x ##.xml (44 files with various names)
      HZ\
	    HZ xxxxM xx.xml (12 files with various names)
    BS 4 Structural Steel Sections\
        UBP ###x###x###.xml (17 files with various names)
    Corus\
      Advance\
        UKBP ###x###x###.xml (17 files with various names)
      Legacy\ (all 05/01/2016)
        UKC ###x###x###.xml (22 files with various names)
    European wide flange beams\
      HEA\
        HEA xxx.xml (14 files with various names)
      HEB\
        HEB xxx.xml (24 files with various names)
      HEM\
        HEM xxx.xml (14 files with various names)

  Pipes\	 (all 17/12/2010, except *) 
    ANSI B36 Welded and Seamless Wrought Steel Pipe\  (all 27/09/2016)
      NPS## x #.###.xml (various names)
    Corus\  (all 17/12/2016)
      Celcius ##.# x #.#.xml (various names)

  Spun Piles\	 
    ICP\  (total of 41 sections)
      ICP ##A###.xml (various names)
      ICP ##B###.xml (various names)
      ICP ##C###.xml (various names)
      ICP ##D###.xml (various names)
    MS 1314 Precast concrete products\  (mainly 13/07/2016)
	  Spun Pile ###A.xml (various names)
	  Spun Pile ###B.xml (various names)
	  Spun Pile ###C.xml (various names)

Templates\
	Blank.rpx
	Cancel product.xml
	Cancel subscription.xml
	haspscope.xml
>	Import actions.xlsx (24/02/2021)
>	Import pile foundations.xlsx (24/02/2021)
	Licence.xml
	Network licence.xml
	Read-only memory.xml
	Read-write memory.xml
	Standalone memory.xml
	Subscription.xml


***ProgramData\Geocentrix\Repute\2.5***
  ReportMaster.fr3 (2.5.9, dated 03/09/2020)
>  ReportTemplate.fr3 (2.5.11, dated 26/03/2021)
>  Repute2.fr3 (2.5.11, dated 26/03/2021)
>  Repute2.ui (dated 27/04/2021)

 Materials\ 
   Concretes\ 
	 C12-15.xml
	 C16-20.xml
     C20-25.xml
     C25-30.xml
     C30-37.xml
     C35-45.xml
     C40-50.xml
     C45-55.xml
     C50-60.xml

    Steels\
     S235.xml
     S275.xml
     S355.xml
     S450.xml

 Sections\ 
   Bearing Piles\ 
	 HP 8 x 36.xml to HP 400 x 140.xml
	 UKBP 203x203x 45.xml to UKBP 356x356x174.xml

   Pipes\ 
	 NPS24 x 0.500.xml to NPS78 x 1.000.xml

   Spun Pipes\ 
	 Spun Pipe 250B.xml to Spun Pipe 120B.xml

***Sentinel HASP/LDK Windows Run-time Installers***
Setup\
  inventory.txt
  Firmware Update\
	FirmwareUpdate.exe (7.5.1.62469)
	readme.html
  HASP\
    License Manager Setup (Win32)\
	  135-Install_LM_Under_Windows_7.pdf
	  lmsetup.exe (8.32.5.40)
	  readme.html
	Removal Tool\
	  aksinstdel_windows.exe (1.0.22017.1)
	  readme.html
  Sentinel HASP-LDK\
    Windows Run-time EnviromentInstallers\
	  Command-line Installer\
	    command line switches.txt (09/11/2016)
>		haspdinst.exe (8.21.50844.1)
>		readme.html
>		Readme_HTML5\
	  GUI Installer\
>		HASPUserSetup.exe (8.21.56409.60000)
>		readme.html
>		Readme_HTML5\
 
***Users\Public\Documents\Geocentrix\Repute\2.5***
	Benchmarks\
		Basile-linear (2003).rpx (16/10/2020)
		Basile-non-linear (2003).rpx (16/10/2020)
		RPT-001.rpx (07/10/2020)
		RPT-002.rpx (07/10/2020)
		RPT-004.rpx (07/10/2020)
	Examples\ (all 07/10/2020, except where noted)
		Import\
			Actions after import.rpx (12/10/2020)
			Template for importing actions.xlsx (23/01/2020)
			Pile Group after import.rpx (12/02/2020)
			Template for importing pile groups.xlsx (06/08/2019)
		Bond and Harris (2008) Ex 13.1.rpx (16/02/2021)
		Fleming (1992).rpx (16/02/2021)
		Fleming et al Chapter 4 Example 1 (1992).rpx (16/02/2021)
		Large circular group.rpx (16/02/2021)
		Randolph (1992).rpx (16/02/2021)
		Tomlinson (1994).rpx (16/02/2021)
	Tutorials\
		Tutorial 1\ (all 26/03/2021)
       		Step1.rpx
       		Step2.rpx
       		Step3.rpx
      		Step4.rpx
       		Step5.rpx
       		Step6.rpx
       		Tutorial 1.rpx

		Tutorial 2\ (all 26/03/2021)
       		Step1.rpx
       		Step2.rpx
       		Step3.rpx
       		Step4.rpx
       		Step5.rpx
       		Step6.rpx
       		Tutorial 2.rpx

		Tutorial 3\ (all 26/03/2021)
       		Step1.rpx
       		Step2.rpx
       		Step3.rpx
       		Step4.rpx
       		Step5.rpx
       		Step6.rpx
       		Step7.rpx
       		Tutorial 3.rpx

		Tutorial 4\ (all 26/03/2021)
       		Step1.rpx
       		Step2.rpx
       		Step3.rpx
       		Step4.rpx
       		Step5.rpx
       		Step6.rpx
       		Tutorial 4.rpx

		Tutorial 5\ (all 26/03/2021)
       		Step1.rpx
       		Step2.rpx
       		Step3.rpx
       		Step4.rpx
       		Step5.rpx
       		Step6.rpx
       		Tutorial 5.rpx (27/04/2021)
       		Tutorial 5.xlsx (19/12/2019)

		Tutorial 6\ (all 26/03/2021)
       		Step1.rpx
       		Step2.rpx
       		Step3.rpx
       		Step4.rpx
       		Tutorial 4.rpx
       		Tutorial 6.rpx

-------------------------------
End of release notes
-------------------------------